2008 model year Beneteau First 21.7s cruiser racer complete with road trailer, spinnaker, bow sprit. 6hp Tohatsu outboard engine. Shore power, self tailing ST15 Harken winches.
GPS not included
Sail Area
I : 28.18 ft
J : 7.87 ft
P : 27.23 ft
E : 9.35 ft
Manufacturer Provided Description
With over 2300 boats sailing worldwide since the introduction of the First 210, the success story continues with the First 21.7S !
2008 model year Beneteau First 21.7s cruiser racer complete with road trailer, spinnaker, bow sprit. 6hp Tohatsu outboard engine. Shore power, self tailing ST15 Harken winches.
GPS not included
Sail Area
I : 28.18 ft
J : 7.87 ft
P : 27.23 ft
E : 9.35 ft
Manufacturer Provided Description
With over 2300 boats sailing worldwide since the introduction of the First 210, the success story continues with the First 21.7S ! Following in the wake of the First 50, the new First 21.7S will feature a hull livery from autumn 2008. A completely new interior with more living space, more stowage and light wood finishes? and a new deck layout, with even more comfortable coamings ! More than ever before, the smallest of the FIRST family is a big cruising yacht with plenty of style !
Additional Description
- YACHT CLUB PACK (optional) -
- 4 full hull-length movable storage nets fixed on 2 stainless steel bars to port and starboard.
- 4 person table setting with B�n�teau logo.
- Stainless steel movable hob with storage case.
- 35L fresh water tank with manual pump.
- Saloon or cockpit table.
- Bulkhead steering compass.
- Teak-slatted cockpit benches.
- SAIL KIT (optional) -
- Mainsail - 4 battens with 2 reefing lines.
- Furling genoa with anti-UV strips (110%).
- Lazyjack.
- SPINNAKER OPTIONS -
- Asymmetric spinnaker rigging with small pole (2 sheets, halyard, small pole + base, articulated pad eye, block with snap shackle).
- Symmetric spinnaker rigging with pole (2 sheets, halyard, jam cleat, aluminium pole, pole uphaul, pole downhaul, 2 blocks with snap shackle).
- YACHT CLUB PACK (optional) -
- 4 full hull-length movable storage nets fixed on 2 stainless steel bars to port and starboard.
- Stainless steel movable hob with storage case.
- 35L fresh water tank with manual pump.
- Saloon or cockpit table.
- Bulkhead steering compass.
- Teak-slatted cockpit benches.
- Outboard bracket.
- SAIL KIT (optional) -
- Mainsail - 4 battens with 2 reefing lines.
- Furling genoa with anti-UV strips (110%).
- Lazy jack.
- SPINNAKER OPTIONS -
- Asymmetric spinnaker rigging with small pole(2 sheets, halyard, small pole + base, articulated pad eye, block with snap shackle).
- Symmetric spinnaker rigging with pole (2 sheets, halyard, jam cleat, aluminium pole, pole uphaul, pole downhaul, 2 blocks with snap shackle).
- A1 ELECTRONICS NAV PACK (optional) - - Raymarine ST 40 log depth sounder.
Additional Description
- 2 locking wet lockers.
- Manual bilge pump.
- 2 teak toerails on the cockpit benches.
Additional Description
- The light coloured woodwork is pear-coloured Mukali.
- FORWARD CABIN -
- Double berth with 1.90m x 1.40m mattress.
- Wood shelving units along hull sides.
- Under berth stowage.
- SALOON -
- 2 single berths 2.20m x 0.60m with mattresses.
- Cream coloured PVC ?Fr�gate? upholstery.
- ?Ilet? fabric curtain with pole separating cabin from saloon.
- Stowage under cockpit and berths.
- 2 fixed hull ports.
- Manual bilge pump.
- GRP non-slip treated sole.
- 2 hooks for hanging oilskins.
- Stowage space for saloon/cockpit table below companionway.
- Lined inner ceiling finish to coachroof.
- Lighting (striplight on beam).
Additional Description
- 1 x 12 V ? 50 Amp battery.
- 6 switch 12 V electrical panel.
- Navigation lights.
Additional Description
- Sink.
- Port and starboard stowage.
- Varnished wood sole.
- Space for hob.
Additional Description
- The hull is a single-skinned GRP laminate.
- The hull is a single-skinned GRP laminate.
- A structural inner moulding formed with unidirectional materials is bonded and laminated to the hull at various points. This plays an important structural role by absorbing the loads and pressure points (shroud chain-plate tie rods, keel, rudder, etc.) throughout the structure, spreading these to reduce stresses on the hull. The surface material of the inner moulding makes it easier to clean and provides a better finish.
- Buoyancy foam sections are distributed within the hull structure.
- The hull gel coat is grey in colour.
Additional Description
- The deck is of injection moulded (glass fibre/balsa/resin sandwich) construction for enhanced strength and optimal insulation.
- MOORING AND ANCHORING -
- Aluminium bow fitting with stainless steel fairlead roller.
- 2 fairleads on the bow fitting.
- 2 aluminium bow mooring cleats.
- 2 aluminium stern mooring cleats.
- Self-draining chain well.
- PULPITS AND GUARDRAILS -
- The boat has a stainless steel pulpit with three supports to simplify anchor handling, and two stainless steel pushpits.
- The deck is surrounded by a stainless steel guardrail supported by 4 stainless steel stanchions with flush anodised aluminium bases.
