Beneteau Oceanis Clipper 393 for sale in Ardrossan, Royaume Uni United Kingdom

Summary

The Oceanis 393 is a real concentration of the art of living on a cruise. With healthy behaviour and easy manoeuvring, the Oceanis Clipper 393 is well-suited to sailing with a small crew. The symbol of this Oceanis generation is designed exclusively for your sailing pleasure.

Jakara is a fine esample of this model with many resent upgrades and excellent maintenace history.

Available to view seven days a week.

SPECIFICATION

Summary

The Oceanis 393 is a real concentration of the art of living on a cruise. With healthy behaviour and easy manoeuvring, the Oceanis Clipper 393 is well-suited to sailing with a small crew. The symbol of this Oceanis generation is designed exclusively for your sailing pleasure.

Jakara is a fine example of this model with many recent upgrades and excellent maintenance history.

Available to view seven days a week.

Specification

The Oceanis 393 is a real concentration of the art of living on a cruise. With healthy behaviour and easy manoeuvring, the Oceanis Clipper 393 is well-suited to sailing with a small crew. The symbol of this Oceanis generation is designed exclusively for your sailing pleasure.

Jakara is a fine example of this model with many recent upgrades and excellent maintenance history.

Available to view seven days a week.

Construction

GRP Hull, deck and superstructure White Hull Blue livery.

Hull

The hull is a single-skinned GRP construction. A structural inner moulding is bonded and laminated to the hull at various points. Its structural role is important as it takes and absorbs the stresses at pressure points (chain plate tie rods, keel, rudder, etc.) spreading the loads and so guaranteeing reduced stress on the hull.

The surface of the inner moulding makes cleaning easier and provides a better finish. The propeller shaft is protected by a moulding in the hull. The hull is white with blue and silver livery. A steel blue option is also available.

Deck

The deck is a balsa sandwich construction for an optimal strength/weight ratio and for good thermal and sound insulation.

• Hull/Deck Joint: The hull/deck joint is secured by 4 toerails. The toerails are screwed and bonded to the deck and are connected by a mooring cleat.
• Keel: The shallow and deep draught keels are cast iron. To improve their durability, the keels are given anticorrosion treatment and improved finish in the factory before assembly, using epoxy compound based coatings and paint.

Steering System

Rudder with GRP stock. The stainless steel leather-trimmed steering wheel is mounted on a pivoting column for ease of passage (Bénéteau patent). Emergency tiller.

On Deck - Mooring and Anchoring

Welded stainless steel bow fitting with offset bow roller for anchor stowage. 4 aluminium roller fairleads on toerail. There are 2 roller fairleads between the bow fitting and the toerail. 6 x 300 mm aluminium mooring cleats. 1 sheave. 800 W – 12 V electric windlass with waterproof relay housing and on-deck up/down switches assisting anchor handling. Self-draining anchor well with hatch cover.

Pulpits and Guardrails

Stainless steel open pulpit with navigation lights. Stainless steel pushpit surrounds aft of cockpit. Lifebuoy holder. Ensign staff holder. 1 outboard motor bracket. Double row of sheathed stainless guardrails supported by 12 stainless steel stanchions and 2 double stanchions. Sliding boarding gate for transom access (Bénéteau patent). 4 teak handrails on coachroof.

Cockpit

Pivoting helm seat allows easy access to bathing platform (Bénéteau patent). Sail locker to port. Liferaft locker to starboard. Locker for 2 gas bottles to port. 2 aft cockpit lockers. All cockpit benches are teak-slatted. Steering wheel console holds navigation instruments. Steering compass on console. Control lever on cockpit coaming to starboard. 1 x 12 V cigarette lighter socket on console. Folding varnished wood cockpit table fixed to steering wheel console. Cup holder. Manual bilge pump.

Bathing Platform and Transom

Transom with teak covered bathing platform. Stainless steel bathing ladder with teak steps and a handrail. Protective rubber rubbing strake. Cold water cockpit shower.

Built in St Hilaire De Riez in France in 2003.

Mechanicals

Volvo D2 55hp

Last serviced January-February 2025

Volvo Penta fuel tank sender replaced

Cruising speed 6 knots

Max speed 7.5 knots

Shaft drive 3 Blade fixed prop

Electrics

2 X 200AH Xtreme AGM Domestic Batteries fitted 2020

Sterling Pro Charge Ultra 12V 30A Smart Charger fitted 2020

Shore power and cable

Rutland 1200 Wind Generator and controller installed (option to add solar panel to controller)

Water System

Pressurised hot and cold fresh water system

Water heated via a 22l dual system calorifier

Tankage

2 x water tanks, capacity 476 litres in total

1 x 138 litres fuel tank

Rigging / Spars

Bermudan masthead sloop

Aluminium Z spars

All Standing Rigging replaced March 2015

Spinnaker rigging and Spinnaker Pole.

Slab reefing Main.

Facnor Furling Genoa System.

Quick Release Babystay.

2 genoa Lewmar 46.2ST winches

2 Lewmar 32.2ST winch

Port Halyard Winch fitted for Spinnaker gear in 2006

Sail Wardrobe

New Mainsail with sail cover and lazyjacks Saturn Sails 2021

Genoa 140%

Accommodation

Sleeps six in three double berths.

Two cabin layout with saloon conversion.

Saloon with U shape seating around large table which converts to a double berth. To starboard full size chart table and storage unit with drawers and cupboards.

Forward cabin with Pullmans berth and en-suite heads forward and hanging locker storage.

Aft Cabin with berth under cockpit sole and hanging locker storage.

L shape galley with two burner gas cooker with oven. Fridge freezer and coolbox, plenty of storage for cooker ware and supplies.

Two heads, both with heads and shower.

Hot blown Air heating.

Navigation

Plastimo Compass

Raymarine ST60 Tri-data for Speed log and Depth

Raymarine ST60 Wind speed and direction

Helmpod and Raymarine 9S Chartplotter installed 2022

ICOM VHF with helm mic fitted

Raymarine ST6001+ Autopilot

Fusion marine stereo with cockpit speakers installed 2022

Glomex Talitha TV antenna installed 2020

Hawk VHF aerial fitted 2020

LED Motoring / deck light fitted 2020

Masthead LED Navigation / Anchor light fitted 2023

Raymarine wind masthead unit replaced 2023

Mooring and Anchoring

60 metres anchor chain and Knox 13kg anchor 2018

Brittany Anchor with chain and warp

Warps and fenders

General

Sprayhood New 2017

New cockpit cushions 2019

New cockpit canopy and frame installed Saturn Sail 2022

New wheel / helmpod cover fitted Jessail 2022

Asado BBQ fitted

Safety

Ocean Safety 6 person life raft fitted (service due)

Safety netting fitted

Boarding ladder

Bilge pumps

Fire extinguishers

Upgrades Since 2018

• 2018: 60 metres anchor chain and Knox 13kg anchor fitted
• 2019: New cockpit cushions (Jessail Ardrossan)
• 2020: ICOM VHF with helm mic fitted, 2 X 200AH Xtreme AGM Domestic Batteries fitted, Sterling Pro Charge Ultra 12V 30A Smart Charger fitted, Glomex Talitha TV antenna installed, Hawk VHF aerial fitted, LED Motoring/deck light fitted
• 2021: Rutland 1200 Wind Generator and controller installed (option to add solar panel to controller), Asado BBQ fitted, New Mainsail fitted with sail cover and lazyjacks (Saturn Sails Largs), Ocean Safety 6 person life raft fitted (service due), Safety netting fitted, Volvo Penta fuel tank sender replaced
• 2022: Fusion marine stereo with cockpit speakers installed, Helmpod and Raymarine 9S Chartplotter installed (MB Marine), New wheel/helmpod cover fitted (Jessail Ardrossan), New cockpit canopy and frame installed (Saturn Sails Largs)
• 2023: Masthead LED Navigation/Anchor light fitted (Clyde Rigging), Raymarine wind masthead unit replaced (Clyde Rigging)