OFFERED BY
BJ Marine
LOCATION
Bangor United Kingdom
YEAR
1971
LENGTH
16.73 ft.
Condition
Used
Year
1971
Make & Model
Boesch Gambler 510
Boat type
Power
Length
16.73 ft.
Fuel Type
Petrol
Location
Bangor United Kingdom
Tax status
Not Applicable
Beam
6.76 ft.
Draft Max
1.74 ft.
Passengers
4
Loa M
16.73 ft.
A masterpiece of wooden motorboat building. Built by the long-established and world-famous Swiss boatbuilding company, still going today. This Boesch 510 (just under 17 feet) presents in very good order having recently been re-varnished and painted, and deck fittings re-chromed. But it is now time for a new owner to take her on and finish the restoration. She basically just needs the internal upholstery done - but she is usable. It would be great to fix her up with a new windscreen but the existing one is good. This Boesch 510 is a classic ski boat from the 1970’s.
A stunning Boesch 510 ski boat (Gambler 510) - a masterpiece of wooden motorboat building. Built by the long-established and world-famous Swiss boatbuilding company, still going today. This Boesch 510 (just under 17 feet) presents in very good order having recently been re-varnished and painted, and deck fittings re-chromed. But it is now time for a new owner to take her on and finish the restoration. She basically just needs the internal upholstery done - but she is usable. It would be great to fix her up with a new windscreen but the existing one is good. This Boesch 510 is a classic ski boat from the 1970’s.
DimensionsBoesch Motorboote originated in Kilchberg/ Zurich Switzerland in 1920 and is still going strong.
This Boesch 510 is a rare 1971/72 example of the boat originally “Gambler 510” used between 1960 and 1974 as the World and European championship official ski boat.
The boat’s serial number appears to be 16331.
The current owner has been patiently restoring the boat over the last 5-6 years but, due to family circumstances, he is reluctantly having to find her a new home.
This Boesch 510 was originally bought by a local Yacht Club and used for some time for waterskiing inland waters locally, Northern Ireland. The boat has only ever been used in fresh water. Unfortunately, during one winter, the Club forgot to drain the coolant water and the engine block cracked rendering the engine unusable.
It was at this stage that ownership changed and the current owners’ family took her one. From an engineering background - they managed to source a similar Chevrolet engine block from the USA (from a 1976 Oldsmobile) and managed to restore the Crusader marinized engine to good health.
The current owner has had the boat for over 30 years – with the last 5-6 years engaged in a major restoration project.
The first priority was to put the boat onto a brand new trailer. The engine was then lifted out for a full overhaul.
It was then clear that both the stringers (which held and supported the engine bearer mounts) as well as the stern hull section needed a significant repair project, and it was at this stage they got the help of a renowned professional wooden boat builder – one of the last remaining in Ireland.
The first task in restoration was to reinforce the wooden stringer beams and this was achieved by sandwiching the original stringers between Iroko wood beams running longitudinally from bow to stern. These were joined to the original wood with epoxy resin and multiple stainless steel bolts along the length of the stringer - resulting in an enormously stronger construction than was originally designed.
The complete boat was then inverted and the 2/3 of the hull from the stern forward was fully replaced with new French sourced marine ply mahogany. He used a detailed scarfing technique to seamlessly join the new section in with the bow section (still in excellent condition) and the hull was glued and screwed in place. Any wood in the stern that was not of perfect quality was replaced with new mahogany hard wood. A new keel was fashioned and protected with a new stainless steel rub strake. The new hull was painted with Danboline internally and a combination of Precote/TopCote externally.
The engine then had a full overhaul. The original is based on a small block Chevrolet 5.0L V8 and was marinized by Crusader engines (Model number RH260) and is linked to a Borg Warner “Velvet Drive” gearbox. The engine block was sent for machining and now has brand new pistons and rings, a new camshaft, new Edelbrock carburettor, new alternator and a brand new 120AH marine battery is about to be fitted. The engine has had its timing done (Delco Remy), aligned and the original stainless steel propellor shaft was replaced with new. The old copper petrol tank has been replaced with a new marine grade plastic tank with electric fuel level gauge. The water impellor has been fully refurbished.
Much of the original brass deckware as possible has been retained, and this again has been re-chromed back to its original glory.
New cast iron exhaust manifolds were sourced from the USA and coupled to 6 new silicone hoses.
In 2022 the deck was then fully replaced by said professional - with French sourced Marine Ply Mahogany and finally sent for a professional varnish spray by a professional boat painter. Ten coats of varnish have been applied and the upper hull painted, in the traditional aquamarine, so typical of Boesch/ Riva of that generation.
Lastly in August 2022 a new custom-made breathable boat cover was purchased and fitted.
SummaryENGINE 1
Engine Manufacturer
Chevrolet
Engine Model
5.0 Litre V8
Drive Type
Shaft
Fuel Type
Unleaded
Horse Power
260
Propeller Type
3 Blade, Bronze
Engine Location
Center
Total Engine Power
260.0
Drive Transmission Description
Direct
HULL
Hull Material
wood
Boat published on 06 June 2023
$4,001 Price change from the publication
Total price amount is based on price change information provided by the broker.
Original Price
$41,976
21 March 2024
$39,287
Current Price
$37,975
The Boesch Gambler 510 is 17 feet long and has a 6.8 feet beam and a draft of 0.530352. This Boesch Gambler 510 is powered by Chevrolet 5.0 Litre V8 with 260 horsepower.. The Boesch Gambler 510 is made of wood and can accommodate up to 4 passengers.
LENGTH:
15.75 ft.
|
YEAR:
2024
LOCATION:
United Kingdom
OFFERED BY:
BJ Marine
$15,675
LENGTH:
17.81 ft.
|
YEAR:
2010
LOCATION:
Pwllheli
OFFERED BY:
BJ Marine
$12,396
LENGTH:
18.01 ft.
|
YEAR:
2006
LOCATION:
Pwllheli
OFFERED BY:
BJ Marine
LENGTH:
16.01 ft.
|
YEAR:
1997
LOCATION:
Cardiff
OFFERED BY:
BJ Marine
$244,878
LENGTH:
17.06 ft.
|
YEAR:
1997
LOCATION:
Greystones
OFFERED BY:
BJ Marine
LENGTH:
17.4 ft.
|
YEAR:
2011
LOCATION:
Greystones
OFFERED BY:
BJ Marine
LENGTH:
16.7 ft.
|
YEAR:
1979
LOCATION:
Largs
OFFERED BY:
DDZ Marine
$34,550
LENGTH:
18.01 ft.
|
YEAR:
2020
LOCATION:
Bossier, Louisiana
OFFERED BY:
Pop Sells
LENGTH:
16.99 ft.
|
YEAR:
2021
LOCATION:
Forked River, New Jersey
OFFERED BY:
Pop Sells
LENGTH:
18.01 ft.
|
YEAR:
2016
LOCATION:
St Augustine, Florida
OFFERED BY:
Pop Sells
$39,450
LENGTH:
18.01 ft.
|
YEAR:
2018
LOCATION:
Saint Johns, Florida
OFFERED BY:
Pop Sells
$36,400
LENGTH:
18.01 ft.
|
YEAR:
2017
LOCATION:
Cedar City, Utah
OFFERED BY:
Pop Sells
At BJ Marine, our mission is customer happiness. With over 30 years representing leading global brands and delivering brokerage sales worldwide, we ensure a hassle-free experience. Explore our extensive range of new and used boats across Europe, UK, and Ireland. Our expert team offers confidential and friendly service, specializing in Beneteau, Fountaine Pajot, Sea Ray, Northman Yachts, and Aventura Catamarans. Discover your next boat with us today.