$39,900
LENGTH:
19.0 ft.
|
YEAR:
2011
LOCATION:
Cairo, Georgia
OFFERED BY:
Pop Sells
LENGTH:
27.99 ft.
|
YEAR:
1977
LOCATION:
Stehekin, Washington
OFFERED BY:
Pop Sells
LENGTH:
19.0 ft.
|
YEAR:
2014
LOCATION:
North Kingstowm, Rhode Island
OFFERED BY:
Brewer Yacht Sales
LENGTH:
18.18 ft.
|
YEAR:
2009
LOCATION:
North Kingstown, Rhode Island
OFFERED BY:
Brewer Yacht Sales
LENGTH:
19.0 ft.
|
YEAR:
2022
LOCATION:
Coral Gables, Florida
OFFERED BY:
Pop Sells
$45,000
LENGTH:
18.01 ft.
|
YEAR:
2020
LOCATION:
Anacortes, Washington
OFFERED BY:
Seattle Yachts
$100,000
LENGTH:
50.0 ft.
|
YEAR:
1976
LOCATION:
Morro Bay, California
OFFERED BY:
Pop Sells
$13,999
LENGTH:
18.01 ft.
|
YEAR:
2014
LOCATION:
Big Lake, Minnesota
OFFERED BY:
Pop Sells
Boat not available.
LOCATION
Cornwall United Kingdom
LENGTH
18.01 ft.
Condition
Used
Make & Model
Custom Boats Carvel Motor Launch
Boat type
Sail
Length
18.01 ft.
Location
Cornwall United Kingdom
Tax status
Inc VAT
Wooden Ships Comments on this Carvel Motor Launch
Open motor launch with a unknown history. Likely to have been built in the 1950’s, perhaps in Looe.
Major refit in 2020 with a new oak keel band and stem repair. The hull was stripped bare and newly painted with Awlgrip, all fittings bedded on Bostik mastic.
The forward cuddy has been nicely built and provides a place of shelter when the weather turns foul.
Wooden Ships Comments on this Carvel Motor Launch
Open motor launch with a unknown history. Likely to have been built in the 1950’s, perhaps in Looe.
Major refit in 2020 with a new oak keel band and stem repair. The hull was stripped bare and newly painted with Awlgrip, all fittings bedded on Bostik mastic.
The forward cuddy has been nicely built and provides a place of shelter when the weather turns foul.
Complete with recent road trailer and full cover, looking smart and ready to go next season.
Length on Deck 17’
Beam
Construction
Carvel planked in pitch pine copper rivet fastened to steam bent oak timbers. Hull finished in Awlgrip paint.
New oak keel band and bottom section of the stem fitted in 2021.
Aft and foredeck in painted plywood.
Varnished iroko forward cuddy with a plywood roof.
Varnished iroko thwarts with iroko knees.
Wooden insulated engine box with a varnished teak lid.
Painted plywood sole boards
Transom hung rudder on Teleflex steering. Possible to be steered by wheel or tiller.
Rig
Small mast mounted in a bracket on the transom to carry flags.
Machinery
Yanmar 1GM10 single cylinder 9hp diesel engine.
Mechanical gearbox with single lever controls and a stainless steel shaft to a fixed 3 blade bronze propeller.
45ah 12 volt battery charged from the engine alternator.
Stainless steel fuel tank under the aft deck of approximately 30 litres with a water separator filter.