OFFERED BY
Clarke & Carter Yacht Brokers
LOCATION
Burnham Yacht Harbour CM0 8BL United Kingdom
YEAR
1957
LENGTH
22.01 ft.
Condition
Used
Year
1957
Make & Model
Custom Gaff Cutter
Boat type
Sail
Length
22.01 ft.
Fuel Type
Diesel
Location
Burnham Yacht Harbour CM0 8BL United Kingdom
Beam
12.17 ft.
Draft
4.0 ft.
?Dormouse? is typical of a pocket cruiser from this period. Built by Shuttlewoods in 1957 on the River Roach. A traditional carvel construction of mahogany on oak and copper fastings. She contains all the desirable features that any yachtsman cruising the East Coast in the late 1950s could have wanted, complete with a centreboard, gaff rig, and wood stove. Now offered laying afloat not far from her original launch having only ever had two owners.
?Dormouse? is typical of a pocket cruiser from this period. Built by Shuttlewoods in 1957 on the River Roach. A traditional carvel construction of mahogany on oak and copper fastings. She contains all the desirable features that any yachtsman cruising the East Coast in the late 1950s could have wanted, complete with a centreboard, gaff rig, and wood stove. Now offered laying afloat not far from her original launch having only ever had two owners.
Viewing by appointment through our Essex office onor via email - essex@clarkeandcarter.co.uk
Accommodation
A large shallow cockpit leads to entering down below through a sliding hatch and companionway doors situated over the engine box. Cooking area to port with a gimballed Dometic two-ring spirit burner, mug and pan storage, and stowage space to starboard with a compass and depth gauge. Settee berth to each slide of the salon with cushions. Davey Hotpot solid fuel stove forward and PottaPotti stowage. Lots of lovely traditional features throughout such as brass oil lamps.
Deck Equipment
Mechanical Systems
Yanmar 1GM10, single cylinder, 9hp inboard diesel engine. Electric start. Single lever controls.
Electrical Systems
Sails and Spars
Gaff Rigged Cutter - Mainmast lowering in a tabernacle.
Douglas Fur Bowsprit - 2021
Mainsail
Staysail
Jib
History
Dormouse was built in 1957 at Shuttlewoods on the River Roach. Built by J W Shuttlewood the younger of the two brothers who during the 1950s ran the Paglesham-based boat yard together. Responsible for having built over 70 vessels Shuttlewood Craft are well known in wooden boat circles and revered for having always been built for customers as opposed to the often more broad approach of having been built on spec.
Working craft, yachts and dingies all left the Shuttlewood slip and often never ventured too far from the immediate area, instead being owned by local yachtsmen and enjoying the thriving sailing scene. Dormouse is no exception having been built for the Mcdowell family who had a number of different craft built by the brothers. Remarkably this 22ft gaff cutter has only ever had two owners and despite extensive cruising has always remained berthed locally to her launch site.
Photography of Dormouse in build alongside Rose of Paglesham can be viewed on the Roach Archive and demonstrates how unchanged this pocket cruiser is -The Roach Archive Link
Current History
Sadly Dormouse's current custodian passed away which has resulted in her not having been prepared for the 2024 season. Despite current cosmetic appearances Dormouse until recently has been maintained to a very high standard. Each season she is normally hauled for antifoul, varnish and topside finishes, hopefully, the works detailed below indicate the standard of this vessel.
2022 - scrub/ antifoul - topsides paint - varnish toerails, rubbing strakes & mast - seacock changed -
2021 - New Douglas fur bowsprit
2020 - scrub/antifoul - topside paint -rotten planking in aft quarters repaired
2019 - scrub/antifoul - mast and spars varnished - cutlass bearing replaced in naval bronze, new cutlass housing - new internal p bracket pads
2017 - scrub/antifoul - centre box inspected and new internal infill for keel case joint and localised repairs - propeller removed inspected and refitted - bottom burnt off, all underwater seams raked out and re stopped- topsides painted
2015 - scrub/antifoul - topside paint - deck paint - new two-layer plywood cabin top & epoxy sheaved - cabin top revarnished - localised re-caulking below the waterline
The company normally acts as brokers for the vendor who unless otherwise stated is not selling in the course of a business. Whilst every care has been taken in the preparation of these particulars the correctness is not guaranteed and they are intended as a guide only and do not constitute a part of any contract. A prospective buyer is strongly advised to check these particulars and where appropriate and at his own expense to employ a qualified marine surveyor to carry out a survey and/or to have an engine trial conducted which if conducted by us shall not imply any liability on our part.
General note on safety equipment: Any safety equipment such as liferaft, fire extinguishers and flares etc., are usually personal to the current owner(s) and if being left on board as part of the sale of a used vessel, may require routine servicing, replacement, or changing to meet a new owner?s specific needs.
HULL
Hull Material
wood
OTHER
Keel Type
Centreboard
The Custom Gaff Cutter is 22 feet long and has a 12 feet beam. The Custom Gaff Cutter is made of wood.
LENGTH:
24.0 ft.
|
YEAR:
1934
LOCATION:
Birdham
OFFERED BY:
RBS Marine
$39,900
LENGTH:
19.0 ft.
|
YEAR:
2011
LOCATION:
Cairo, Georgia
OFFERED BY:
Pop Sells
$110,000
LENGTH:
24.02 ft.
|
YEAR:
2023
LOCATION:
Warren, Rhode Island
OFFERED BY:
Pop Sells
$13,750
LENGTH:
20.01 ft.
|
YEAR:
1986
LOCATION:
Acton, Maine
OFFERED BY:
Pop Sells
$8,000
LENGTH:
25.0 ft.
|
YEAR:
1981
LOCATION:
Sister Bay, Wisconsin
OFFERED BY:
Yachtworks
$5,600
LENGTH:
21.49 ft.
|
YEAR:
1977
LOCATION:
Westbrook, Connecticut
OFFERED BY:
Brewer Yacht Sales
