FARR X2 short-handed racing yacht
“A result of a passion for sailing and the need for performance. Performance of the Farr X2 is truly where ‘Passion meets Performance'” – Bret Perry FARR X2 Global Project Manager.
We have commissioned some new build Farr X2's from our European based build facility, so the old stock now has to go.
FARR X2 short-handed racing yacht
“A result of a passion for sailing and the need for performance. Performance of the Farr X2 is truly where ‘Passion meets Performance'” – Bret Perry FARR X2 Global Project Manager.
We have commissioned some new build Farr X2's from our European based build facility, so the old stock now has to go. All the lessons learned on our demo boat have been adapted into it with constant refinements and upgrades, so this boat is very well sorted and ready to go.
The X2 is "smiles all round sailing" with oodles of performance waiting for you to unlock, but in a manageable and refined product. You simply have to come sailing to understand what this boat is all about and why you need to have one!
Book your demo now!
UK 20% VAT INCLUSIVE PRICE IS £261,000. CAN BE EXPORTED INTERNATIONALLY VAT FREE
PART EXCHANGE WELCOME!
Yacht Information
- Boat Name: FARRCICAL
- Builder: XSP - Extreme Sailing Products
- Designer: Farr Yacht Design
- Engine: Volvo Penta D1-13 12.2 Hp
- Hull / deck construction: Vinylester / PVC Core
- ISO Category: A-4
- 2023 IRC Rating 1.071 without water ballast 1.076 with ballast
Dimensions
- Length Hull: 9.2m / 30’1”
- LOA: 10.85m / 35’7“
- Beam: 3.20m / 10’6”
- Draft: 2.05m / 6’8”
- Displacement: 2,450kg / 5,402lbs
- Ballast: 1000kg / 2,205lbs
- Water Ballast: 250L
Engine And Propulsion
- Volvo Penta D1-13 12.2hp Sail-drive
- 130S-D LH ratio 2.19:1
- Blade kit, 2-blade, 14x9, LH folding propeller
- Spinlock control face and gear selector
- Fuel shut off valves at tank
Hull And Deck Construction
Glass-foam sandwich Vinyl Ester laminate vacuum bagged. Sandwich construction with PVC foam core.
Structural bulkheads in composite glass vinylester sandwich with some reinforced unidirectional fibres and then bonded to the hull with structural vinyl ester adhesive and/or selected bonding paste (plexus or spa-bond).
Standard white gelcoat finish.
Male / Female cassette style keel connection. Cast iron fin with moulded composite fairings. Cast lead bulb with composite fairings.
Two transom hung carbon/epoxy pre-preg rudders. Single GRP composite tiller and Spinlock tiller extension.
Rig Dimensions
- I: 11.935m
- J: 3.880m
- P: 12.20m
- E: 4.34m
- ISP: 13.65m
- STL: 5.405m
- Headsail area: 25.0m2
- Mainsail area: 34.2m2
- Asymmetric spinnaker: 102.0m2
- Code 0 Area: 57.0m2
- Sail area subject to final sail design and rating placement
Rig And Rigging
Selden T800 Intermediate Modulus carbon fibre. CnC Pre Preg wound, load orientated filaments to minimise weight and maximise stiffness.
Deck stepped two-piece tube for ease of transport and storage..
T700 Pre Preg mast head with sheave access and mast head instrument mounts.
Twin aerofoil spreaders with 23ft aft rake machined alloy spreader bars and tangs.
Machined twin top mast backstay tangs and SK 99 cables with Technora cover.
Selden Carbon rod vang system.
Masthead LED tri-light.
1 x Masthead halyard sheave exit.
1 x 2:1 15/16 Code Zero halyard sheave and exit.
1 x 2:1 Main halyard sheave and exit.
1 x Jib halyard, sheave and exit.
1 x 2:1 GS/SS/J5 sheave and exit..
Lazy jack allocated take offs.
Dyform standing rigging.
2 x reef carbon boom with 2 x spinlock reef jammers.
Boom lazy jack attachments.
Aluminium mast base with halyard organisers.
Running rigging
1 x 2:1 Main halyard - SK99 8mm Performance Technora
1 x 1:1 Masthead halyard – SK78 8mm Performance in Technora
1 x 1:1 Jib halyard – SK99 8mm Performance Technora
1 x 1:1 Masthead tack line – 78 8mm Performance in Technora
Jib sheeting control system – port and starboard
SK78 6mm Course tune main sheet
SK78 8mm Performance Technora. fine tune main sheet
SK78 8mm Performance Technora. Top mast backstay control lines with fine tune
SK78 6/8mm Performance
2 x Jib Sheets – SK78 8mm Performance Technora
2 x Spin Sheets – SK78 8mm Performance Technora.
2 x reefing control systems – SK78 8mm Performance
1 x Main traveller system – SK78 6mm Performance
1 x Vang control – SK78 6mm Performance
Bow sprit
1.6m Carbon bow sprit
1 x 1:1 Masthead tack line exit
1 x 15/16 2:1 Code Zero exit
Removable sprit for travel and smaller marina berth requirements
SK99 Bobstay
Deck Gear
- Harken high performance racing package
- 2 x Performa 46.2 STP Self Tailing primary winches
- 2 x Performa 46.2 STP Self Tailing cabin top winches
- Transom mounted traveller track with course and fine tune end boom sheeting control
- Winch-less course topmast runner control with 16:1 fine tune
- Athwartships jib tracks and car for full inboard and full out board set up
- Cross sheet and multi sheet control to primary and cabin top winches
- Spinlock jammers.
- Custom carbon bow sprit
- 1:1 M/Head tack line with Spinlock Jammer
- 2:1 Tack line Spinlock Jammer
- Stanchions and lifelines: OSR Cat 1 and ISO/CE Category A offshore stainless steel stanchions and 5mm1 x 19mm stainless wire lifelines
- Stainless steel push and pulpit
- Centre aft stanchion for required electronic devices.
- 1 x 63890 Lewmar trapezoid forward hatch
- 2 x 171020 Lewmar cockpit hatches – port and starboard
- 1 x lockable main cockpit hatch system
- Full custom cockpit rope bag pack
Technique Voile Sails All New In 2022
- Squaretop race mainsail, 2 reefs, 5 battens (3+2) Area: RACE Upwind Membrane film/film
- J2, medium Area: RACE Upwind Membrane film/film - hanks
- J3 + reef, heavy Area: RACE Upwind Polyester cruise laminate grey, tri-radial - hanks
- A2, medium runner Area: RACE Downwind Nylon 0,9oz, Superkote 90
- A3, medium reacher Area: RACE Downwind Nylon 0,9oz, Superkote 90
- Cableless Gennaker, race Area: RACE Downwind CZ Aramid film/taffeta, tri-radial
- Karver, KF1.5 Large Standard Version zero furler
- Storm jib
- Trysail
A CREDIT can be agreed if the sails are not required. They are all in very good and serviceable condition.
Interior
- Galley with gimballing Jet-boil
- Dedicated tackable navigation station
- Marine sea water flush sea toilet in forepeak
- Midships adjustable lightweight alloy and canvas pipe cots x 2 (port and starboard).
- Aft adjustable lightweight alloy and canvas pipe cots x 2 (port and starboard)
- Storage under midships pipe cots
- Interior finish - easy wipe white gel coat. Simplistic but practical racing design
Nav And Electronics
B&G:
- H5000 Pilot (inc Linear Drive pilot ram)
- Precision 9 compass
- Rudder reference & feedback unit
- Motion sensor
- 2 x Graphic displays (one at each helm)
- 2 x Pilot controllers (one at each helm)
- Flush fit H3000 speed sensor and DST800 depth sensor
- Carbon VHMU (vertical mast head unit - wind sensor) + bracket
- Triple 20/20 HV mast displays + bracket
- NMEA 2000 cables + Ethernet, connectors & installation
- Zeus3S 9" MFD
- B&G v60 VHF with DSC & AIS receive + remote handset
- Whipflex VHF antenna
- WiFi 4G router for GoFree function
- NAIS 5000 transceiver (includes GPS, antenna splitter)
Electrics:
- 2 x Way switchboard
- 3 x Battery switches (on, off and parallel)
- VSR -charging relay
- 2 x interior Hella LED lights
- Magnetic compass with power/light circuit
- VDO fuel gauge and sender
- Ener-drive battery monitor
- 1 x 50 ah sealed gel engine battery – Optima Blue Top
- 1 x 120 ah sealed house battery – Dekka AGM
- 1 x dc outlet
- 1 x Hella 2LTmasthead Tri light.
- Purpose designed and pre-made house electrics loom with full schematic plan for easy maintenance.
Plumbing
Water Ballast System
- 1 x Custom water ballast in/out valve operational from cockpit.
- 2 x 250L water ballast tanks in built.
- Transfer plumbing system operational from cockpit.
Galley
- 1 x galley through hull with seacock.
- 1 x Hand pump for fresh-water system.
- 2 x 40L fresh-water tank soft pack.
Bilge Pumps
- 1 x Cockpit manual bilge pump Cat 2 compliant
- 1 x Interior manual bilge pump Cat 2 compliant with full boat roving capabilities
Delivery And Commissioning
- Delivery to South Coast UK is included in the price. Other locations by request
- Cradle with full support splashes for yard use
- 2 coats of Nautix A4 hard racing antifoul flatted back to smooth surface
- Jib stowage bungees on foredeck
- Mooring kit : Outils Ocean flat fenders & warps
- Anchor kit : Fortress FX-11 anchor, chain & warp
- Mainsail cover - plain colour (name is extra by quotation)
