OFFERED BY
Clarke & Carter Yacht Brokers
LOCATION
Burnham Yacht Harbour CM0 8BL United Kingdom
YEAR
1983
LENGTH
20.01 ft.
Condition
Used
Year
1983
Make & Model
Forge Marine V20
Boat type
Power
Length
20.01 ft.
Fuel Type
Diesel
Location
Burnham Yacht Harbour CM0 8BL United Kingdom
Beam
6.99 ft.
Draft
1.51 ft.
"Ali Oops" is an early 1980's aluminium built performance cruiser. She was originally fitted with a 185hp Mercruiser petrol engine to race in Cruiser Class Offshore Racing and was very successful, particularly in the rough weather races, winning her class in 1984. She has ample room for four to six adults in the cockpit. Her Volvo Penta D3, 160hp diesel engine enables her to comfortably reach 35 kts and cruise at 25 kts.
"Ali Oops" is an early 1980's aluminium built performance cruiser. She was originally fitted with a 185hp Mercruiser petrol engine to race in Cruiser Class Offshore Racing and was very successful, particularly in the rough weather races, winning her class in 1984. She has ample room for four to six adults in the cockpit. Her Volvo Penta D3, 160hp diesel engine enables her to comfortably reach 35 kts and cruise at 25 kts. Below she has a forward V berth suitable for two adults. She has space for a chemical heads and is equipped with a stainless sink.
Viewing by appointment only through the Essex officeor via email - essex@clarkeandcarter.co.uk
Accommodation
Mechanical Systems
Single Volvo Penta D3, five cylinder, 160hp turbocharged diesel engine. Volvo stern drive to a four-bladed propeller. Single lever Volvo throttle/gear control. Volvo gauges including RPM, volts, temperature, pressure and leg trim. She is capable of reaching 35 knots and will cruise comfortably at 25 knots. Engine serviced annually.
Engine started by single 12v battery charged by the alternator.
Equipment
Construction
Built by Stephen and Richard Lucas of Elstead Forge Ltd. (later Forgecraft Marine) in 1983. The hull is tig welded 3/16" and the superstructure 1/8" NS8 (now called 5083) marine grade aluminium. Her final fit out was completed by her first owner. The appears to be in good, sound condition throughout.
The company normally acts as brokers for the vendor who unless otherwise stated is not selling in the course of a business. Whilst every care has been taken in the preparation of these particulars the correctness is not guaranteed and they are intended as a guide only and do not constitute a part of any contract. A prospective buyer is strongly advised to check these particulars and where appropriate and at his own expense to employ a qualified marine surveyor to carry out a survey and/or to have an engine trial conducted which if conducted by us shall not imply any liability on our part.
General note on safety equipment: Any safety equipment such as liferaft, fire extinguishers and flares etc., are usually personal to the current owner(s) and if being left on board as part of the sale of a used vessel, may require routine servicing, replacement, or changing to meet a new owner?s specific needs.
HULL
Designer
Stephen Lucas
Hull Material
aluminium
The Forge Marine V20 is 20 feet long and has a 7 feet beam. The Forge Marine V20 is made of aluminium.
$45,000
LENGTH:
20.01 ft.
|
YEAR:
2012
LOCATION:
Wabeno, Wisconsin
OFFERED BY:
Pop Sells
$68,900
LENGTH:
20.01 ft.
|
YEAR:
2019
LOCATION:
Rockwall, Texas
OFFERED BY:
Pop Sells
$38,900
LENGTH:
20.01 ft.
|
YEAR:
2012
LOCATION:
Tampa, Florida
OFFERED BY:
Pop Sells
$56,000
LENGTH:
20.01 ft.
|
YEAR:
2018
LOCATION:
Kissimmee, Florida
OFFERED BY:
Pop Sells
$48,499
LENGTH:
20.01 ft.
|
YEAR:
2022
LOCATION:
Deatsville, Alabama
OFFERED BY:
Pop Sells
$48,900
LENGTH:
20.01 ft.
|
YEAR:
2022
LOCATION:
Panama City, Florida
OFFERED BY:
Pop Sells
