OFFERED BY
Boatpoint
LOCATION
Blyth United Kingdom
YEAR
1993
LENGTH
29.2 ft.
Condition
Used
Name
Swallow
Year
1993
Make & Model
Hallberg Rassy 29
Boat type
Sail
Length
29.2 ft.
Fuel Type
Diesel
Location
Blyth United Kingdom
Tax status
Inc VAT
Berths
5
Cabins
1
Draft
5.25 ft.
Beam
9.28 ft.
LWL
22.97 ft.
'Swallow' is an excellent example of the ever popular mid range cruiser from the renowned builders Hallberg-Rassy. This model was in production between 1982 and 1994 with 571 being built. 'Swallow' is number 523 and was built and launched in 1993.
Upgraded over the years including 'Copper Coat', new autopilot, hot pressurised water, Mikuni heating, upgraded standing rigging, new saildrive seal and much much more.
Her teak decks are in fine order and she has the added bonus of a full cockpit enclosure.
'Swallow' is fitted with an 18hp, 2-cylinder Volvo Penta MD2002 with saildrive unit and 2-Blade folding propeller. The engine has completed 1833 serviced hours with most recent in April 2024.
The engine is located beneath the companionway. This allows easy access for daily checks and servicing requirements. The saildrive and stop cock are accessed from the cockpit through a hinged watertight hatchway. Engine start panel built into cockpit coamings. Sail drive seal replaced within the last 5 years.
Bank of 3X12V batteries providing engine start and domestic power. The batteries are fitted with key style isolators on both the domestic and engine side. Vessel is fitted with shore power and a battery charger.
Bermudan masthead sloop rig with deck stepped aluminium spars by Selden. Stainless steel standing rigging replaced in 2017. Terylene braid on braid running rigging brought aft with a series of turning blocks, deck organisers and spinlock clutches. All winches are by Lewmar and include ST40 2-speed. self tailing sheet winches, ST16 2-speed halyard and spinnaker winches and a mast mounted single speed reefing winch. Inner forestay attachment and rigging added in 2018.
Sails are in excellent condition with a boom mounted Hood slab reefing mainsail, a Hood roller furling genoa. Mainsail is mounted in a HR branded lazy jack bag and the genoa is fitted with a UV strip. Storm jib for inner forestay.
Navigation Aids
Safety Equipment
Deck Equipment
Canvas Work
Below decks is in superb condition with spacious saloon and a comfortable fore cabin. The interior is what you would expect from a builder of this pedigree and features solid teak pieces and teak veneered marine ply. Easy clean GRP inner hull and roof liner with built in lights. Upholstery is original but in excellent condition. New carpets in saloon. Hot & Cold pressurised water introduced in 2017.
Saloon
Chart table
Galley
Forward cabin
Heads Compartment
GRP constructed vessel with 1.60M draft long fin with encapsulated ballast. Counter and skeg mounted rudder with varnished tiller steering. Her underwater areas were taken back to the gelcoat and she was Copper Coated by local boatyard in 2020. The boat comes ashore every year for a wash and a burnish with anodes checked/replaced.
White gelcoat topsides with signature Hallberg-Rassy blue hull band. Moulded rubbing strakes from forward of mid-ships aft with steel band. Hull topsides were professionally polished in May 2024.
Teak topped raised gunwale around the decks with scuppers to quickly dispel any water. Raised foredeck with Hatch to fore cabin. Bow with anchor locker and Anchorman deck mounted manual windlass.
Teak decks in excellent condition. Cockpit with teak topped lockers and cockpit sole. Transom with stainless steel ladder.
For a full, detailed specification with additional photographs and direct contact details for the listing office visit our website
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Unless otherwise stated on the specification sheet the following presumptions are made
- Sail drive and shaft seals are more than 5 years of age
- Fuel and gas hoses and regulators are over 5 years old
- Standing rigging and sails are more than 10 years old
Please note that as the broker/agent, we cannot guarantee or warrant the serviceability of any safety equipment included within the inventory, including but not limited to the condition, operation, or service dates of such equipment. It is the responsibility of the buyer to thoroughly inspect and assess the condition of all safety equipment prior to purchase.
NOTE - Please ring our offices prior to visiting, as the boat may be unavailable for viewing or located at a different marina.
Cruising Speed
5
Engine Count
1
Engine Horse Power
18
Engine Tankage
60.0
Max Speed Knots
7
HULL
Ballast
1751.0
Hull Material
fiberglass
Hull Type
monohull
OTHER
Keel Type
fin
Builder
Hallberg Rassy
Displacement(kgs)
3801.0
The Hallberg Rassy 29 is 29 feet long and has a 9.3 feet beam. This 1993 diesel Hallberg Rassy 29 with 18 horsepower is capable of reaching a maximum speed of 7 knots and a cruising speed of 5. The Hallberg Rassy 29 is made of fiberglass.
$37,971
LENGTH:
29.0 ft.
|
YEAR:
1991
LOCATION:
Chichester
OFFERED BY:
Network Yacht Brokers
$45,641
LENGTH:
29.2 ft.
|
YEAR:
1984
LOCATION:
Weymouth
OFFERED BY:
Boatpoint
$10,900
LENGTH:
29.0 ft.
|
YEAR:
1985
LOCATION:
Brooklyn, New York
OFFERED BY:
Pop Sells
$14,500
LENGTH:
29.0 ft.
|
YEAR:
1987
LOCATION:
Annapolis, Maryland
OFFERED BY:
Annapolis Sailyard
$16,500
LENGTH:
29.0 ft.
|
YEAR:
1973
LOCATION:
Stockton, California
OFFERED BY:
Pop Sells
$12,800
LENGTH:
29.0 ft.
|
YEAR:
1982
LOCATION:
Au Gres, Michigan
OFFERED BY:
Pop Sells