"Intruder boats are built of 100% composite materials (no wood), all hand laid glass (no chop), closed cell foam flotation, with 21" of freeboard forward, and 9" walk around gunnels. Although the Intruders bottom is not flat but has 10 degrees of deadrise forward and 3 degrees of deadrise aft., and is not considered a V-Hull, it is considered to be much more than just your average skiff. The Intruder is one of the driest riding, best-performing skiffs on the market today.
"Intruder boats are built of 100% composite materials (no wood), all hand laid glass (no chop), closed cell foam flotation, with 21" of freeboard forward, and 9" walk around gunnels. Although the Intruders bottom is not flat but has 10 degrees of deadrise forward and 3 degrees of deadrise aft., and is not considered a V-Hull, it is considered to be much more than just your average skiff. The Intruder is one of the driest riding, best-performing skiffs on the market today. Whether in the backwaters and bays, out around the ocean inlets, or several miles offshore, you can feel and see the quality of the Intruder."
-Glen Rose, Rose Craft Marine
Standard Features
- All hand laid glass (no chop)
- 100% composite construction (no wood)
- Fiberglass stringer system
- Closed cell foam floatation
- 5 ft front casting platform with anchor locker and 18" X 52" storage with lid
- 25 in aft deck with 2 storage coolers and battery compartment
- Navigation Lights
- Console with storage seat, storage access doors top and bottom
- 5 stainless steel pull up cleats
- 4 stainless steel rod holders in gunnels
- Hydraulic steering
- Stainless steering wheel
- 12 volt accessory plug
- Under gunnel rod racks, 3 rods per side
- Stainless hinges and lift handles on all fiberglass access hatches
- Stainless thru hulls
- Stainless bow eyes and stern eyes
- 50 gallon fuel tank
Other Features
- Custom welded leaning post with back rest and (4) rod holders
- Custom welded T-top w/ electronics box and (4) rod holders
- Standard Horizon Explorer VHF radio in overhead electronics box
- 8' Power-pole on stbd transom
- Atlas jackplate
- Cushions for all seating locations (including aft hatch)
- Rear hatch seating backrest
- Lenco trim tabs
- Trolling motor mounting plate on bow
- 3.5ft rear casting deck w/ 20 gal. live well + 3 dry storage compartments
- Cooler in aft casting deck plumbed for live well
- Fusion MS-RA55 stereo headunit w/ (4) fusion stereo speakers
- Fuel gauge and tachometer on dash
- 24v trolling motor power system w/ bow plug
- On-board battery charger
- Fwd and aft facing spreader LEDs on T-top
- Swim ladder on port transom
- Rear anchor light power plug/mount
