Need to sell ready to go!!
23' Mako 236 CC 2021
2021 mako 236 with a 300hp mercury verado and trailer. 101 hours in like new condition, everything works as it should. Motor is still under warranty. Simrad electronic, fusion stereo system, plenty of storage and coolers through out the boat. Ready for fishing or family fun.
Manufacturer Provided Description
The all-new MAKO® 236 CC is a powerful and versatile mid-sized offshore boat with a fine balance of creature comforts and hardcore fishability. Cushioned forward seating with removable backrests and drained storage beneath plus a center transom jump seat keeps the family comfortable—and dual aft livewells plus two 135-qt. fishboxes in the roomy aft deck make fishing smooth and effective.
With the legendary MAKO overbuilt deep V hull, it’s ready for any offshore adventure. And it’s backed by MAKO Assurance 5+Life—the best factory warranty in saltwater boats.
- Backed by MAKO® Assurance 5+Life—the best factory warranty in saltwater boats
- Forward seat cushions, removable backrests & optional bow filler/table
- Port & starboard forward seating w/247-qt. (233.75 L) insulated storage & drains below
- 2 aft 22-gal. (84.23 L) rounded livewells w/angled fills & friction-hinged acrylic lids
- Console w/Garmin® GPSMAP® 8610 chartplotter MFD, Mercury® SmartCraft® digital gauges, standard digital switching through multifunction displays, trim tab switches & custom anodized aluminum steering wheel w/knob & dual-cylinder hydraulic steering
- Port tuna/dive/boarding door w/hinged gate & stainless steel ring
- In-console head w/gelcoated surfaces, 6' (1.83 m) clearance & wiring access
- Integrated forward-console seat w/52-qt. (49.21 L) insulated, drained cooler
- Custom aluminum leaning post w/flip-up bolster, 84-qt. (79.49 L) cooler & rod holders
- Optional leaning post baitwell
- Canvas T-top w/electronics box
- 135-qt. (127.76 L) aft port & starboard in-deck fishboxes w/gravity drains & diaphragm pump
- Flush-folding, cushioned center transom jump seat
Additional Specs
- Length:23' 4"
- Beam: 8' 6"
- Bottom width: 6' 10"
- Max. recommended HP: 350 HP
- Fuel capacity: 136 gal.
- Max. person capacity: 11 persons
- Max. person weight: 2040 lbs.
- Max. person, motor & gear weight: 3375 lbs.
- Interior depth: 32"
- Transom height at center line: 30"
- Deadrise: 21 degrees
- Draft: 18"
- Dry weight: 5010 lbs.
- Average hull weight: 4100 lbs.
- Average package weight: 7200 lbs.
- Package height w/T-top or hardtop: 12' 0"
- Storage length: 32' 10"
Standard Features
Certification & Safety
- Backed by the MAKO® Assurance 5+Life—the best factory warranty in saltwater boats
- NMMA® certified
- Factory leak tested for hull, plumbing & fitting integrity
- Horn
- Flush-mounted Ritchie Navigation® Voyager compass
Console
- Garmin® GPSMAP® 8610 chartplotter MFD w/Mercury® SmartCraft® digital gauges
- Digital switching through multifunction displays
- Custom anodized aluminum steering wheel w/knob
- Binnacle-mounted motor control(s)
- Dual-cylinder hydraulic steering
- Trim tab switches w/position indicator lights & auto retract
- Powdercoated aluminum battery switch panel w/labels, main power shutoff, emergency parallel switch, removable knobs & voltage sensing relays (VSR)
- Switch panel w/manual reset circuit breakers & illuminated switches
- Easy access to helm electronics, instruments & switches
- FUSION stereo w/4 lighted speakers
- Integrated forward-console seat w/52-qt. (49.21 L) insulated, drained cooler
- Integrated full-width fiberglass footrest w/non-skid surface
- Tempered safety glass windshield w/aluminum frame
- Marine-grade tinned wiring w/submersible connectors
- Lockable, sealed glovebox
- Portlight
- Extra-large electronics mounting surface
- 2 console drink holders
- 12V DC outlet & dual USB ports
Leaning Post
- Custom aluminum leaning post
- Flip-up bolster
- 84-qt. (79.49 L) cooler below leaning post
- Rod holders
T-Top or Hardtop
- Canvas T-top
- .25" (6.35 mm) aluminum backing-plate reinforcement for T-top
- Electronics box
Head
- Gelcoat-finished surface, wiring access hatches, battery switch panel & 6' (1.83 m) head room
Interior
- Anchor locker
- 2-tone high-density marine-grade vinyl upholstery w/stain-resistant coating & composite substrates on seats
- Port & starboard forward seats w/247-qt. (233.75 L) insulated storage below w/gravity overboard drainage
- 278-qt. (263.09 L) bow center in-deck storage compartment
- Low-profile powder-coated aluminum bow rails
- Self-bailing cockpit w/transom valves
- 2 port & 2 starboard gunnel-mounted rod holders
- Port & starboard under-gunnel rod racks for 6 rods up to 7' (2.13 m) long
- Freshwater shower w/pull-out spray head
- Tuna/dive/boarding door w/hinged gate & stainless steel ring
- Flush-folding, cushioned center transom jump seat
- 135-qt. (127.76 L) aft port & starboard in-deck fishboxes w/gravity drains & diaphragm pump
- 4 transom-mounted rod holders
- 2 aft 22-gal. (84.23 L) rounded livewells w/angled fills & friction-hinged acrylic lids
- Aft starboard recessed tool & leader holder
- Molded non-skid surfaces throughout
- Bilge access hatch
- Aft port & starboard coaming bolsters
- 360° coaming bolsters
- Six 8" (20.32 cm) stainless steel, anti-rattle pop-up cleats
- 2 bow drink holders
Performance
- Legendary dry-riding MAKO® hull
- Aggressive deep V hull design
- Performance lifting strakes
- Recessed electric trim tabs
- Factory-matched stainless steel propeller(s)
Construction & Exterior
- Color: MAKO® Bone White gelcoat
- Ring deck design for more usable interior space
- 100% composite construction
- Coosa® Bluewater 100% composite transom core
- Heavy-duty, fiberglass-encapsulated transom w/2" (5.08 cm) fiberglass-impregnated, high-density composite core
- Hull/deck joint chemically sealed & bonded 360° & mechanically fastened every 6" (15.24 cm) w/316 stainless steel fasteners
- 1-piece molded fiberglass stringer grid w/integrated transom knee supports & gelcoat finish
- Closed-cell foam-injected stringer grid for USCG-approved flotation
- Heavy-duty rub rail w/stainless steel insert
- Premium marine-grade stainless steel hardware & fasteners for corrosion resistance
- Heavy duty extra thick, closed-molded hatch covers w/finished undersides & integrated gaskets
- Aluminum backing plates for cleats & chocks
- 3-step, stowable dive ladder
- Port & starboard molded-in swim platforms
- Recessed, pull-out, telescoping boarding ladder
Electrical, Mechanical & Plumbing Systems
- Portable toilet
- Sea Chest keeps 3 pumps submerged for cooler running & longer life
- Automatic 2,000 GPH (7,570.82 LPH) bilge pump
- 1,100 GPH (4,163.95 LPH) livewell pump
- Pressurized raw water washdown pump
- High-speed raw water intake
- Transom w/freshwater washdown
- Pressurized freshwater pump
- 6-gal. (22.71 L) freshwater tank
- USCG-compliant navigation lights
- 2 cockpit courtesy lights & 1 head light
- 1 cranking battery per outboard
- Dual battery rigging w/voltage sensitive relay (VSR) & emergency parallel switch
- Marelon® corrosion-free seacocks on all below-water thru-hull fittings
- Labeled, tinned-copper wiring for easy maintenance & protection in a marine environment
- Pre-wired for optional anchor windlass
Optional Trailer
- OPTIONAL tandem-axle EZ Loader® aluminum trailer available.
- NMMA® certified.
- DOT approved.
- Tandem-axle brakes.
- 14" (35.56 cm) radial tires w/galvanized V5 wheels.
- Oil bath hubs.
- Leaf spring suspension.
- Heavy-duty winch w/nylon strap & safety strap.
- Stainless steel hardware.
- Galvanized steel components.
- LED lighting.
- LED marker lights.
- PVC loading guides.
- Galvanized fenders.
