Nauticat 331 for sale in Ullapool United Kingdom

English

A development of the Nauticat 33 which established the Nauticat brand. The Nauticat 331 sports a modern fin and skeg type configuration below the waterline; providing improved sailing performance in all conditions Internally the joinery work is finished to a high standard with good headroom throughout the accommodation.

The Nauticat 331 STROMA is fitted out with the rare ‘live aboard’ interior layout. Providing two double cabins, linear galley and large heads with dedicated shower stall. In the deck saloon the layout provides a full size saloon table and wrap around U-shaped settee, enjoying the full benefits of the deck saloon. Benefitting from significant upgrading in the last two ownerships STROMA’s extensive inventory includes highlights such as:

Topsides professionally polished June 2023

Foredeck layout re-worked in 2020 with new bobstay and double stemhead roller arrangement fitted

Yanmar 4JH2-DTE, 75hp marine diesel engine

Engine exhaust temperature alarm system installed 2020

Engine space CCTV camera (CAM220IP) connected to display on Raymarine Axiom MFD (2019)

SidePower 4hp thruster

Sterling ProCharge Ultra 230VAC – 12VDC battery charger

Sterling Power Products 12VDC – 230VAC invertor

Sunware solar panels with Steca digital controller (2016)

Raymarine autopilot system with dual control stations (2016)

Raymarine i50 depth, speed and log instruments (2019)

Raymarine i60 wind instrument (2019)

Raymarine Axiom 7” MFD (2019)

Raymarine Axiom 12” MFD (2019)

Raymarine Quantum 2 Q24D radar scanner (2019)

Airmar RV-200 TH Down Vision depth transducer (2019)

Raymarine 91 DSCVHF (2019)

Raymarine AIS700 transceiver (2019)

Redbox Mini Wifi system and BAT antenna (2019)

Stainless steel standing rigging, fully replaced 2018

Removable inner forestay with custom made storm jib fitted 2019

Deck wash system installed 2016

Custom made Nauticat davits fitted to stern (2016)

Vulcan 20kg anchor, self stowing in bow roller (2020)

Lying ashore near Ullapool in the North West of Scotland the Nauticat 331 STROMA is available for immediate viewing by prior appointment.

CONSTRUCTION

Hull Construction:

Single piece GRP moulding

Hand consolidated laminate

GRP moulded structural frames and stringers

GRP engine beds with steel inserts to take engine mounts.

Plywood bulkheads, finished with a teak veneer, fully bonded to hull

Original gelcoat finish externally with white topsides and blue style stripes

Topsides professionally polished June 2023

Underwater hull finished in navy antifouling.

Deck & Superstructure Construction:

Single piece GRP moulding incorporating superstructure and cockpit.

Reinforced in way of deck fittings.

Stainless steel bowsprit

Foredeck layout re-worked in 2020 with new bobstay and stemhead roller arrangement fitted

Teak capping rail to finish gunwhale

Windows of toughened safety glass in anodised alloy frames.

Lifeline strong points fitted 2020

White gelcoat finish to moulding

Decks finished with laid teak decks

Keel & Rudder:

Fin and skeg type underwater profile

Lead ballast keel

Acid proof keel bolts.

GRP moulded skeg supporting semi-balanced rudder

Stainless steel rudder stock and internal structural rudder framework

MACHINERY

Engine:

Yanmar 4JH2-DTE marine diesel engine.

75hp @ 3200RPM

4 cylinder, turbo charged, indirectly cooled.

Yanmar mechanical reversing marine gearbox.

Single lever, dual station, Morse controls with safety lock-out on internal throttle

Manual sump drain pump for changing engine oil

Engine space CCTV camera (CAM220IP) connected to display on Raymarine Axiom MFD

Maintenance & Performance:

Engine last serviced spring 2023

Engine exhaust temperature alarm system installed 2020

Cruising speed under engine 7kts

Recorded engine running hours @ June 2023 – 1867hrs

Propulsion:

Stainless steel propshaft

Conventional stuffing gland with remote greaser.

3 blade bronze propeller

Steering:

Capillano hydraulic steering system

Dual station

Bow Thruster:

SidePower 4hp thruster

Single station Joy-stick control at external helm station

Autopilot:

Raymarine Autopilot system

Raymarine P70 control head (2016)

Raymarine linear drive (2016)

ELECTRICAL SYSTEMS

Voltage systems:

12VDC onboad power system

240VAC shore power system

Shore Power:

Factory fitted, hardwired system.

RCD protected.

Ring main with selection of UK type 3pin sockets, battery charger and water heater.

Battery Banks:

Engine Battery – 1x 12VDC, 95Ah lead acid

Domestic Batteries – 2x 12VDC, 180Ah acid

Alternator:

Single engine driven alternator

Battery Charger:

Sterling Pro-Charge Ultra Battery Charger

230VAC – 12VDC, 40amp

Solar Panels:

2x 100w Marlec Sunware panels, mounted on wheelhouse roof

Steca digital charge regulator

Inverter:

Sterling Power Products Inverter

12VDC – 230VAC, 600w

Battery Monitoring:

Merlin SmartGauge battery monitor system (2019)

PLUMBING

Fresh Water:

Pressurised hot and cold water systems

Faucets provided in galley and heads.

Dedicated shower fitting provided within heads

New pressure pump installed 2015

Bilge Pumps:

Manual bilge pump – Henderson Compact 50

Electric bilge pump- Rule 2000 with auto/manual switching

Deck Wash:

Saltwater deck wash system installed 2016

Jabso 50psi pump with plug-in style connector on foredeck

TANKAGE

Fuel:

Twin diesel tanks

Stainless steel tank construction

Approximate capacity of each tank 250ltrs

Approximate total capacity 500ltrs

Fresh Water:

Single fresh water tank.

Polyethylene tank construction

Approximate total capacity 450ltrs

Calorifier:

Isotherm insulated tank

Heated by engine cooling water or 230VAC immersion heater

Tank Monitoring:

Tank gauges for fuel and water tanks.

NAVIGATION & COMMUNICATION EQUIPMENT

On Deck:

Depth – Raymarine i

Speed/Log – Raymarine i

Wind – Raymarine i60 with masthead transducer (2019)

Plotter/Radar – Raymarine Axiom 7” display (2019)

Radar – Raymarine Quantum 2 Q24D scanner, mizzen mast mounted (2019)

Magentic Compass

Below Decks:

Plotter/Radar/Fishfinder/CCTV – Raymarine Axiom 12” display (2019)

Repeater – Raymarine i70 multfunction display (2019)

Depth/Speed Transducer – Airmar DST

Fishfinder Transducer - Airmar RV-200 TH Down Vision (2019)

Communications Equipment:

DSC VHF – Raymarine 91 DSCVHF (2019)

AIS – Raymarine AIS700 transciever (2019)

WIFI – Redbox Mini Wifi system and BAT antenna (2019)

DOMESTIC EQUIPMENT

Galley:

Cooker – Eno 2 burner gas cooker and oven, gimbal mounted

Fridge – Professionally serviced and overhauled 2019

Double stainless steel sink

Mixer tap

Gas system inspected and tested in 2019

Heads:

Toilet – Jabsco manual marine toilet

Shower stall

Wash hand basin

Mixer tap

Dedicated shower fitting

Heating:

Eberspacher D3LC diesel fired, blown air heating system

Thermostatic cabin controller

Outlets in cabins, saloon and heads

Entertainment:

Sony DAB/FM/MW/LW head unit

Speakers within saloon

Lighting:

Overhead lighting throughout interior

Reading lights in cabins

All cabin lighting is LED

LED engine space lighting

ACCOMMODATION

Summary of Accommodation:

Nauticat ‘Live Aboard’internal layout

Double cabin forward

Linear galley

Heads compartment with shower stall

Deck saloon

Double aft cabin

Accommodation Finish:

Joinery work below decks of high-quality teak constructed of veneered plywood with solid teak trims.

Varnished satin finish to all joinery work.

Soles of traditional teak and holly styling, finished with varnish.

White laminate worktops with varnished teak fiddles and trims in galley

Laminate finish to bulkheads and joinery units in head with varnished teak trims.

Tiled sole in heads

Headlining in white textured panels with varnished teak trims between

Saloon and cabin cushions and upholstery replaced 2019

Description of Accommodation from Forward:

Forward Cabin:

Double bunk offset to port.

Standing room inboard of bunk

Curved bench seat inboard of bunk forward

Hanging locker with shelves outboard of standing room aft to starboard

Galley:

Linear galley running along starboard side of passage way between saloon and forward cabin

Gimbal mounted Eno gas cooker mounted forward with worktop infill to cover when not in use

Worktop extending aft with inset double stainless steel sink aft

Top loading fridge fitted below worktop section between cooker and sink

Folding additional worktop section mounted to port side of passageway.

Selection of locker and drawers beneath worktop and above outboard

Heads:

Live aboard layout provides a larger than expected heads compartment

Outboard aft facing manual marine toilet mounted inboard forward

Counter top outboard of toilet with inset corner wash hand basin

Vanity lockers above countertop outboard

Shower stall to aft end of compartment with dedicated shower fitting

Saloon:

Helm station to starboard forward with engine controls and nav instrumentation mounted around helm station.

Sliding door to access starboard side deck immediately outboard of helm station

U-shaped bench settee to port side of saloon

Adjustable height saloon table mounted inboard of settee.

Forward central section of settee is removable to access port sliding door.

Hanging locker outboard of steps to aft cabin, aft to starboard side of saloon

Aft Cabin:

Accessed via companionway to aft port side of saloon.

Double bunk outboard to port

Curved bench seat inboard of bunk aft

Standing room inboard of bunk forward

Hanging locker with shelves outboard of standing room

DECK EQUIPMENT

Rig:

Deck stepped, single spreader, masthead ketch rig.

Mast and spars of silver anodised alloy, manufactured by Selden Masts

Stainless steel standing rigging, fully replaced 2018

Furlex 200S roller reefing system on forestay

Removable inner forestay installed new 2019

Slab reefing mainsail

Slab reefing mizzen

Rod kicker for main mast boom.

Mast mounted radar reflector

Lazyjacks for main and mizzen masts

Running rigging fully replaced 2019

Winches:

Primary Winches – 2x Harken 32, self-tailing, two-speed

Main Mast Halyard Winches – 2x Andersen 10, single-speed

Mizzen Mast Halyard Winch -

Sails:

Mainsail – White Dacron, fully battened, 3 reefing points

Genoa – White Dacron, roller reefing

Mizzen – White Dacron, single slab reef

Storm Jib – Owen Sails, custom made

Canvas Work:

Mainsail Cover – Stackpack type cover with mast boot and lazy jacks

Mizzen Cover – Stackpack type cover with mast boot and lazy jacks (2020)

Wind Break – Cover sheltering cockpit space aft when at anchor

Windscreen Sun Cover

Windlass Cover

Cockpit Cushions with Backrests – Owen Sails 2019/20

Anchoring & Mooring:

Bower Anchor – 20kg Vulcan (by Rocna) anchor on 60m, 10mm chain rode

Kedge Anchor – 25lb CQT with chain (6m) and warp (35m) rode

Anchor Windlass – Lofrans Tigres windlass, 12VDC, 1000w with plug-in remote control

Mooring Warps – Selection

Fenders - Selection

Tender:

Inflatable Dinghy – Seago 290

Davits – Custom made Nauticat davits fitted to stern (2016)

General:

Stainless steel bowsprit with hardwood tread panels and fixed bobstay

Double bow rollers mounted on bowsprit

Anchor self-stowing in dedicated roller built into starboard side of bowsprit

Stainless steel stanchions supporting teak grabrail with lower stainless steel guardwire

Guardwire gates to port and starboard sides

Fender baskets to port and starboard forward, secured to stanchions

Deck mounted alloy mooring cleats forward, midships and aft

Deck mounted anchor windlass with chain self-stowing into anchor locker

Access to anchor locker on deck via hatch offset to port

Aft cockpit with GRP moulded seating to port and starboard with lockers beneath seating

External helm station mounted on aft end of deckhouse, centrally.

7” Axiom MFD mounting on trunnion bracket forward of helm

Raymarine Depth, Speed/Log, wind and autopilot instrumentation mounted within pedestal moulding to port and starboard sides of helm

Swimming/Boarding ladder, 5 rungs, fitting on port or starboard gunwale

Outboard storage bracket on aft rail

SAFTEY EQUIPMENT:

General note on safety equipment: Any safety equipment such as liferafts, Epirbs, fire extinguishers and flares etc. are usually personal to the current owner(s) and if being left on-board as part of the sale of a used vessel may require routine servicing, replacement, or changing to meet a new owners specific needs.

Navigation Lights:

Masthead tri-colour and anchor light

Steaming light

Navigation lights

Life saving:

Liferaft – 4 person cannister raft (2019)

EPIRB – 406MHz

Horseshoe lifebuoy

Webbing jackstays

Inshore Flare Pack

DISCLAIMER

In this case we are acting as brokers only.

The Owner is not selling in the course of a business. whilst every care has been taken in their preparation , the correctness of these particulars is not guaranteed. The Purchaser is strongly advised to check the particulars and where appropriate at their expense to employ a qualified Marine Surveyor to carry out a survey and/or to have an engine trial conducted which if conducted by us shall not imply any liability for such engine on our part.

This vessel is offered subject to prior sale, price change, or withdrawal without notice