Classic Yacht Classic 50FT steel cutter for sale in Chatham Marina, Kent United Kingdom

This 50ft steel cutter provides berths for up to six people in 3 cabins, with a double cabin to aft portside and a large single berth to starboard.  

Forward is a large double berth with a large opening deck hatch which gives lots of light and makes the cabin feel very airy.  The large concealed bar features a solid mahogany folding dining table with removable fiddles and sofa chairing. 

The seating can also be used to provide two further berths. These berths have appropriate tailored  lee-cloths. There is a roomy navigation area with navigators chair and full sized navigation station desk with both red and white lights and under-table storage for navigation books etc. 

The galley is to port and has a seamless stainless steel worktop and has a pair of sinks with pressurised hot and cold water . Hot water heated by the engine and via a 240v immersion heater. There is a stainless Voyager 4500 oven, grill and hob with new gas pipes all fitted June 2024. A new Cello 24" Smart TV has also just been fitted June 2024. 

There is a large heads compartment with marine toilet with a featured teak wash basin (new 2023) with shower and hot/cold mixer tap and multiple storage lockers and handholds throughout. The yacht has wide side decks which provide a real sense of safety when walking around deck.  

The companion way steps lead up to the large and very secure cockpit which has a sold doghouse and lots of storage lockers. 

• 2 X 55lb CQR Anchors
• 60m of 10mm anchor chain 
• 100m of anchor warp 
• Danforth Kedge Anchor with  40m of chain and 30m of warp
• Electric Windlass
• Danbuoys x 2
• Horseshoe buoys x 2
• Liferaft  6 person (new 2016 needs a service)
• Fenders x 6
• Mooring Warps x6
• 10ft Aluminium rib with 15hp outboard by separate negotiation 

• Chart Plotter - Raymarine C90W with electronic charts European/Caribbean
• AIS Receiver/Transponder -Raymarine
• Depth - Raymarine
• Speed/log -Raymarine
• Wind -Raymarine
• Autopilot - Raymarine EV400 new 2024 with Hydraulic RAM
• Fleming Ocean 60 wind vane
• SSB (New SSB Antenna 2023)
• VHF/DSC M323 ( New  in 2022) with command mic
• ST60 Iridium Go Satellite phone
• New Mast Antenna
• Furuno Radar

• Fire Extinguishers x 4
• Radar Reflector 
• EPIRB
• Liferaft 6 person in need of a service
• Jack Stays 
• Manual Bilge pump x 1
• Electric Bilge pumps x 1
• Electric Bilge pump x 1 Johnson SP4000 with float switch - new June 2024

The rigging on board this Alan Mummery Steel Cutter includes a twin spreader 15m aluminium mast, with new 2022 twin running backstays and spare masthead sheaves. There are heavy duty 'granny bars' at the mast and it has mast steps to the top of the mast. A heavy duty bowsprit features twin rollers and a steel rod bobstay; there is also a spinnaker and jockey pole with sheets and guys.

Nearly all of the running rigging is new, with ample spare ropes onboard, including Lewmar reefing lines. There are also 2016 Jackstays and Lazy jacks.

There is an extensive sail wardrobe which includes: two mainsails - one fully battened, three reef, slab reefed to cockpit; three genoas - one high cut and one in bright orange made in 2021 with Arctic Explorer name and logo on it ; staysail; two spare Yankee genoas; storm staysail (hank on); cruising chute; spinnaker with new sheets and guys

The deck of this Steel Cutter features a Heavy duty doghouse with reefing lines and main halyard led inside.

Winches:

• Wilkins two-speed 26mm primary winches;
• Harken 16mm secondary winches;
• Lewmar winch for reefing lines in cockpit;
• Barlow 26 mainsheet winch in cockpit;
• Two mast winches; and one outhaul winch on boom. There are also a full suit of rope clutches

Sails:

• Mainsail, Hood Thorn burrow - Slab (2002) Stack Pack, Fully Battened, 3 Reefs
• Headsail Thorn burrow - Furling (2002)
• Tri Sail (Unknown Year)
• Cutter (2009)
• Storm Jib (Unknown Year)
• Spinnaker (Unknown Year)
• Cruising Chute (2010)
• 2 x Genoas (2002) and  (2021)