$285,000
OFFERED BY
Denison Yacht Sales
LOCATION
Mayfield, NY United States of America
YEAR
2018
LENGTH
29.99 ft.
Condition
Used
Year
2018
Make & Model
Riva 30
Boat type
Power
Length
29.99 ft.
Location
Mayfield, NY United States of America
Beam
9.15 ft.
This boat was designed and built by Reets Boatworks in Mayfield, NY. Although it may look similar to the Italian boat it is significantly different.
She is powered by twin Ilmor 6.2 V8's along with a bow and stern thruster to make dockside maneuvering easy. The integrated swim platform makes for a nice all-around addition to the boat.
The boat is cold molded and 3 layers thick with west system epoxy between each layer.
This boat was designed and built by Reets Boatworks in Mayfield, NY. Although it may look similar to the Italian boat it is significantly different.
She is powered by twin Ilmor 6.2 V8's along with a bow and stern thruster to make dockside maneuvering easy. The integrated swim platform makes for a nice all-around addition to the boat.
The boat is cold molded and 3 layers thick with west system epoxy between each layer. From the waterline down, it has carbon fiber in between each layer and a layer of Kevlar with fiberglass to protect the outside. That is then coated with Pettit Protect impervious bottom paint.
This boat has been used sparingly by the owner and has not been used in 2 summers.
The boat's design is a replica of the original boat frames and lines while using modern materials to improve strength, lower maintenance costs, and improve performance.
The bottom is 3 layers of 1/4" Okoume plywood epoxy coated on all sides, bi-axial carbon fiber in-between the 1st, 2nd and 3rd layers. The bottom is wrapped with 6oz fiberglass and then faired using West system 410 microfibers.
The sides and the deck are composed of 3 layers. Two inner 1/4" plywood skins will be coated on all surfaces and then planked with 3/8" Mahogany. The sides and deck were then stained traditional colors and varnished with 12-14 coats of Pettit flagship varnish.
All the screws and bolts used in the boat are stainless steel. All the epoxy used is the West System.
The bilge area is Coated with West system epoxy and then varnished with two coats.
Hardware:
Electronics:
Powertrain:
ENGINE 1
Engine Manufacturer
Ilmor
Horse Power
430
Tankage
284
Engine Tankage
284
Engine Location
inboard
ENGINE 2
Engine Manufacturer
Ilmor
Horse Power
430
Tankage
284
Engine Tankage
284
Engine Location
inboard
HULL
Hull Material
fiberglass
OTHER
Builder
Reets Boatworks
The Riva 30 is 30 feet long and has a 9.2 feet beam. This Riva 30 is powered by Ilmor with 430 horsepower.. The Riva 30 is made of fiberglass.
$439,000
LENGTH:
33.01 ft.
|
YEAR:
2012
LOCATION:
Fort Lauderdale, Florida
OFFERED BY:
Rick Obey Yacht Sales
$650,000
LENGTH:
33.01 ft.
|
YEAR:
2020
LOCATION:
Miami,
OFFERED BY:
FYI Yachts
$450,000
LENGTH:
33.01 ft.
|
YEAR:
2013
LOCATION:
Fort Lauderdale, FL
OFFERED BY:
Denison Yacht Sales
$719,000
LENGTH:
33.01 ft.
|
YEAR:
2020
LOCATION:
Fort Lauderdale, Florida
OFFERED BY:
Allied Marine Brokerage and Charter
$29,500
LENGTH:
29.99 ft.
|
YEAR:
1984
LOCATION:
Palmetto Bay, Florida
OFFERED BY:
Pop Sells
$69,000
LENGTH:
29.99 ft.
|
YEAR:
2008
LOCATION:
Marina Del Rey, CA
OFFERED BY:
Denison Yacht Sales
