The Seascape 24 is a completely "ready to sail" in fantastic condition. Very lightly used with an impressive specification including a full set of North Sails and nav equipment. Easy to launch, simple to rig and just so much fun to sail. "Nautibuoys" is ashore on her trailer with us in Swanwick marina, raring to go.......
Yacht Information
- Boat: Seascape 24
- Year: 2017
- Builder: Seascape
-
The Seascape 24 is a completely "ready to sail" in fantastic condition. Very lightly used with an impressive specification including a full set of North Sails and nav equipment. Easy to launch, simple to rig and just so much fun to sail. "Nautibuoys" is ashore on her trailer with us in Swanwick marina, raring to go.......
Yacht Information
- Boat: Seascape 24
- Year: 2017
- Builder: Seascape
- Nautical Design: Manuard Yacht Design
- Product design: GIGODESIGN
- Engine: Tohatsu Sal 6hp outboard motor
- Located: Swanwick Marina
Dimensions
- LOA: 7.29m / 24ft 0 in
- Beam: 2.50m / 8 ft 0 in
- Draft: 0.29m - 2.0m / 10 in - 6ft 2 in
- Light displ: 890kg
- Mast height above deck (carbon fibre): 10.00m
- Air draft: 11.26m
- Height on trailer: 2.80m - w/o mast 2.10m
- Length with trailer: 10m - w/o mast 8.90m
- Insubmersibility volume: 1.6 sq.m
Engine
- Tohatsu sail 6hp outboard motor (flushed after each use)
- 10 litre fuel tanks (2 off) and fuel line
- Storage backed at stern of boat
Systems
- Electric pack 12v / 50w
- Custom control switch panel under the companionway
- Volt meter in switch panel
- NASA BM1 battery monitor
- 2 x AGM 12v/33 amp/hr battery
- 12v / 18w solar panel in front of the mast with appropriate regulator
- Double USB outlet
- 12v outlet
- Interior indirect LED lighting
- Sentiment GSM/GPS boat monitor device monitoring unwanted access (magnetic door sensor), prevent battery damage, log your trip and keep track of all your routes, mileage, duration and speed
- 230v shore power system and shore power lead
- 230v battery charger
- 230v outlet in cabin
Deck Equipment
- Upgrade to high railing with pulpit
- 45cm high pushpit and stanchions, additional pulpit of the same height
- Stainless steel pushpit + 4 x stanchions with lifelines
- Stainless steel bow and stern mooring cleat
- Stainless steel chainplates for shrouds and forestay
- Coachroof mounted opening hatch 580cm x 58cm for access to the cabin
- 2 x Harken STA20 winches on the coachroof
- Winch handles
- 2 x Ronstan jib tracks with blocks on coachroof
- Spinlock clutches for halyards and control lines
- Ronstan blocks and cleats for other controls
- Uprated Ronstan ratchet blocks for spinnaker
- Carbon look tiller with Ronstan tiller extension
- Tempered glass windows on each side of the coachroof
- Stern storage with two access hatches in cockpit
- Removable custom bathing ladder
- Removable seat / boarding plank
- Removable engine bracket mounted on the stern of the boat with reinforcing back plate
- MAST & RIGGING:
- Compotech mast and boom with one set of swept back spreaders built in high quality carbon fibre
- Carbon parts UV lacquer protection
- Continuous 1 x 19 standing rigging with bottle screw adjusters
- Boom (carbon fibre 2.08m) with 1:8 outhaul and 2 x reefs
- 1:12 boom vang
- Retractable carbon bowsprit controlled from the cockpit
- Tapered mainsheet with mainsheet tackle of ball bearing low friction blocks
- 2 x jib sheets
- 1 x 1:2 Dyneema main halyard, 1 x Dyneema jib halyard
- 1 x Dyneema fractional spinnaker halyard
- 2 x reef lines
- 1 x bowsprit control line
- 1 x spinnaker tack line
- 2 x tapered spinnaker sheets
- 1 x 1:8 Cunningham control line
- Gennaker Barbour hauler system - masthead and fractional position led back to cockpit clutches
- Classic jib hoist system
- Dyneema jib halyard
- Additional sheave block in the mast and spinlock jammer on the coachroof
- Bartels deck furler and swivel
Sails
- North Sails Main - 24 sq.m Pentex, triradial cut with 3 x reefs and bolt rope
- North Sails J1 Jib - 16 sq.m Pentex laminate, triradial cut with vertical battens and zipper along the luff
- North Sails J2 heavy weather jib with vertical battens and zip luff
- North Sails Gennaker - 63 sq.m Norlon 75, black
- North Sails Code 5 reaching spinnaker with Facnor FX1500 furler, 40 sq.m Norlon 150, black
- NEW SAILS:
- North sails 3Di Mainsail - 21.87 sq.m Square Top, 3 x reefs
- North Sails 3Di Jib - 16 sq.m full & leech battens with reef
Covers
- 4 x Seascape branded rope bags
- Winch handle bag
- Seascape lazy bag
- Sun cover (lazy bag assembly)
- Jib sock zip up cover
- Padded rudder bags
- "Pig Outs" padded rail covers
- Mast, boom, spreaders and shroud transport covers
- Boat top cover
- 2 x Seascape branded marine bean bags
Domestic Inventory
- Bulkheads and furniture lightly covered with satin finish top paint and white RAL 9003 gelcoat on the moulded parts for light, clean and low maintenance finish
- Double V-berth forward with sealed buoyancy tanks beneath, light and ventilation through big 580mm opening hatch, cushions for the V-berth
- Light and spacious saloon with large companionway hatch and a numeric lock for the main companionway. Long berths / benches with storage lockers under the first 1.5m and sealed buoyancy tanks under the rest. 2 x multi-purpose sliding step, left and right of the keel box. Full length cushions for the berths, small cushions for the sliding step for widening the berth. Plexiglas companionway washboard and sliding hatch EVA foam padding protection on the floor
- Wood table - can fit in saloon or cockpit with storage bag
- Gimbal Jetboil cooker holder
- 4 x Seascape branded "crew" storage bags
- Chemical toilet - boxed and unused
Navigation Pack
- Garmin echoMAP 95sv colour GPS chart plotter / sonar (detachable)
- Built in Geochart UK and Ireland maps
- Garmin mounted on clever swing out bracket
- Airmar DX900+ depth/speed/temp Sensor + Nk processor ultrasonic smart sensor (boat speed) no paddle wheel
- V-Tronic Heliflex stub antenna - HA 156C
- Raymarine RAY52 VHF c/w internal GPS - E70345
- Raymarine AIS 650 class B transceiver - E32158
- Raymarine AIS 100 antenna splitter - A80190
- Raymarine Evolution tiller pilot - T70153
- Raymarine S100 wireless remote - E15024
- Raymarine wireless wind system - T101-868
- Custom carbon mast bracket for 3 x wireless displays
- Masthead tricolour navigation/anchor lights with switches on the control panel
- Windex at masthead
Trailer
- Single axle braked trailer with low profile tyres for easier slipway launching
- Spare tyre
- Integrated brake drum flushing system
- Mast support with winch for launching / recovering the boat
- Custom GRP cradles
- Rubber rollers and pads in front - again for easier slip launching
- Transport straps with pads and light board
Safety
- Manual bilge pump in cockpit
- Horseshoe lifebuoy
- Fenders and warps
- Anchor chain and warp in storage bag
- Buckets
- Jonbuoy
- Deck and cockpit jack lines
Additional Information
- CONSTRUCTION
- Hull and deck constructed with vacuum infusion of Vinylester resin, Airex PVC foam and Soric GRP sandwich with unidirectional multiaxial laminates
- Hull reinforced with infused GRP stringers in keel and in bow sections
- Deck comes with high traction non-skid moulded non slip
- 2 x transom hung rudders built of GRP foam sandwich and aluminium casings
- Hull and deck are moulded in single tone off-white RAL 9003
- VINYL WRAP
- Custom vinyl wrap in metallic blue with Seascape 24 logo
- KEEL ARRANGEMENT
- Swing keel built in GRP vinyl ester composite with lead bulb insert
- Keel edges are protected with epoxy primer
- Manually operated stainless steel custom built worm drive winch
- Slotstrip keel lips closing the exit of the keel box
- SINGLE POINT LIFT SYSTEM
- Custom 3 part lifting strop
- Centre lift point above the centreboard
- A-FRAME MAST HOIST SYSTEM
- Enables stepping of the mast without a crane
- Lightweight aluminium powder coated A-frame
- Spliced Dyneema ropes with hooks for aft support
Directions To Sea Ventures Swanwick
By Car from M27 coming from the West:
- Leave M27 at junction 8, and turn right at the roundabout at the bottom of the slip road, signposted Hamble A3024
- At the next (Tesco) roundabout, take the 1st exit onto A27/Providence Hill
- Continue for about 1.0 mile then turn right into Swanwick Marina at traffic lights.
By Car from M27 coming from the East:
- Leave M27 at junction 9, and turn left at the roundabout at end of slip road
- Turn right at next roundabout, signposted Hamble A27
- Continue along A27 for about 3 miles, turn left into Swanwick Marina at traffic lights. Sea Ventures are in an office overlooking the marina
By Rail:
- Nearest station is Bursledon on the Southampton – Portsmouth line
- Nearest mainline is Southampton Airport on the main London – Southampton line
