Seawind 1190 Sport for sale in Gig Harbor, WA United States of America

A self-contained, capable, independent catamaran is truly Bliss. This Seawind 1190 Sport was conceived, constructed, and fitted for maximum self sufficiency, performance, and freedom. She has an extensive 1000 watt solar array charging new lithium house batteries and low electrical loads for quiet independence. It is sized to run her Spectra watermaker for unlimited fresh water on passages. She has diesel-fired hydronic heat for year-round comfort and no heating loads. She has narrow and easily driven hulls for quick acceleration and great light wind performance. Her carbon bowsprit carries large furling light air sails. Her jib self tacks. Just turn either of her twin helms to come about in tight channels without grinding. Her outboards are efficient, ubiquitous, and tilt up for zero drag under sail. Her daggerboards point her high and retract for excellent off wind speed. Her cassette rudders retract too so that you can access the skinniest of anchorages or even a protected beach. Enjoy the security of helming from bulkhead positions with excellent visibility beneath a full hard bimini. Enjoy a secure warm enclosed salon on cold Winter days. Or open the tri-fold salon door entirely joining the salon and cockpit to live gracefully inside and out in fine weather. She is poised in the Northwest at the foot of the Inside Passage and upwind and upcurrent of Mexico, Central America and the entire South Pacific. She is ready to go. You've found Bliss. What course will you follow? Contact Matthew today.

Specifications & Equipment

NOTABLE AND RECENT ADDITIONS:

Victron 3000w Inverter/charger
800 Amp Hours of Lithium batteries
Victron MPPT solar charge controllers
Victron GX Touch 70
Shore power
Hydronic diesel heater with 19 gallon fuel tank
Raritan electric flush head
Cockpit cushions
Full B&G Navigation Suite including 12″ chartplotter, 4g RADAR, AIS receiver, autopilot, wind and depth

MAST/BOOM/SAILS:

Clear anodised aluminium mast and boom. Double spreader rig

Standing Rigging Forestay 1 x 19 Dieform wire

Cap Shoruds Dynex Dux synthetic rigging

Diamonds 1 x 19 stainless wire

Halyards Main halyard: 12 mm Spectra rope : Heavy duty shackle

Jib halyard: 8 mm Spectra rope. Heavy duty shackle

Topping lift: 8 mm rope, Heavy duty shackle

Spinnaker Halyard: 8mm Spectra with snap-shackle

Screecher halyard with 2:1 purchase system

Boom outhaul: 10mm Spectra

Slab reefing

Fully battened square top black aramid, laminate mainsail. Triple stitched radial construction. Leach adjustable batten end caps. Fibreglass sail battens

Black aramid, laminate jib with vertical battens

Asymmetric spinnaker

Carbon fiber bowsprit with synthetic bridle wires

Mainsail cover with integrated lazy jack system

Self-tacking headsail, curved headsail traveller track with end stops. With New single line control sheet to cockpit

Main sheet run to port and starboard helms

DECK EQUIPMENT:

Aluminium Hatches & portholes (9 in total)

4 x Forward Hatches 470mm x 470mm

2 x Mid cabin hatches 470mm x 470mm

1 x Port Bathroom window hatch 507mm x 377mm

1 x Aft Cabin window hatch 507mm x 377mm

Fiberglass deck hatches

Forward anchor & storage hatches x 5

Cockpit storage hatches x 2

6 x Docking cleats. Each side : bow, stern & amidships

1 x Heavy duty mooring cleat on forward walkway

Ventilation: 2 x forward cabin hatch vents

Mast base turning blocks. All halyards & sail controls to cockpit

13 x Rope clutches

Sheet winches : 2 x 45ST 2 speed self tailing, 3 x 40ST 2 speed self tailing & 1 x 15ST self tailing

Stanchions/Rails: High quality stanchions 3 life-lines with stainless wire.

2 x transom access gates with pelican hook releases

Aft swim ladder

Dinghy davits

FORWARD BEAM, CATWALK AND TRAMPOLINES:

Carbon reinforced fwd beam

Pelican striker and adjustable cable

1 x Mooring plate above foredeck

2 x Anchor roller under deck. Permanent stowage position for 45lb Plough anchor

Catwalk in pvc foam-sandwich fibreglass

Light weight plastic coated open netted trampolines

AFT BEAM AND DECK:

Carbon reinforced Targa Bar in gloss carbon finish with curved mainsheet track and sports traveller control system

Stainless steel framed seats behind aft beam

full width hard top over cockpit

FOILS & STEERING SYSTEM:

Twin helm stations

2 X 32 lightweight composite steering wheels

Both wheels independently linked to steering system. system offers back-up redundancy

Retractable dagger boards below deck height when retracted

Complete backup set of rudders including cassettes

INTERIOR FINISH:

Furniture and cabin sides in gloss gelcoat finish

Cabin top lined with lightweight liner

Floors: synthetic timber flooring

Cabinet doors in lightweight modern finish

SALOON:

Lightweight saloon table

Upholstered settee

Cocktail cabinet

Forward opening windows with in marine ocean hatch frame. Side windows in 6mm toughened glass

Tri-fold saloon doors

Removable alloy framed, helm hatches

GALLEY:

Spacious galley with lightweight granite coat countertops

Induction cooktop (LPG plumbing remains and old stove available)

Stainless steel sink

Pressure fresh water system

Front opening upright fridge with freezing compartment 130 liters

Under bench storage

Trash bin

LPG solenoid control in galley

SLEEPING CABINS:

Port Owner’s Hull
Light weight pvc foam cored timber doors on all private cabins

Port & Starboard fwd cabins: Each queen sized bed (2050mm x 1540mm). owner’s bed is athwartship and guest bed is fore and aft

Aft Starboard cabin: Double bed (1990mm x 1230mm)

Mattresses 150mm ( 6 ) foam upholstered

Cabins lined

12volt LED lighting

Storage/Cupboards

PORTHEAD:

New Polished light weight pvc foam cored timber door

Electric flush head. Discharge via holding tank

Holding tank built in. Discharge Pump out by shore station or directly overboard

Pipes, skin fittings and sea-cocks are easily accessible

Vanity basin with pressure water

Separate shower stall with wall mounted shower head & mixer tap.

Electric shower bilge pump with direct overboard discharge

Large quantity cupboards / shelves to very high quality

LIGHTING/ELECTRICAL SYSTEM:

High quality DC electrical switch panel with circuit breakers, LED indicator lights and voltage display

Marine grade tinned electrical wiring with extensive use of heat sealed connectors

800 amp hours of lithium house batteries

One engine cranking battery 130 amp hr heavy duty battery

Victron 3000w Inverter/charger

230amp heavy duty isolation switch

Victron MPPT solar charge controllers

Victron GX Touch 70

30 amp AC shore power

12 V lighting : Numerous 12V interior lamps and courtesy lights throughout including recessed lights in cockpit

4 x 12V outlets

Navigation lights mounted on bows

Deck floodlight mounted on spreaders

Mast head anchor / riding light

PLUMBING /FRESH WATER TANKS:

Pressure water system with water to galley and both bathrooms

Fresh water tank: 700 litres ( 185 gallons)

Electric fresh water pump

Electric bilge pumps (2) with controls integral with master battery switch panel.

Manual bilge pumps (2) in each hull.

New Marelon flush mounted through-hull fittings

Electric toilet in head

1 x LPG bottle 4.5kg

Fresh water tank gauge

ENGINES:

Twin lightweight Honda 25hp engines. Mounted under each helm seat at each steering station

Remote electric key start with electric tilt fitted

Dual engine controls at port helm station

Complete set of engine spares

NAVIGATION:

Twin steering compasses

2x Multifunction displays with speed depth and wind transducers installed

ANCHORING /MOORING / DINGHY:

Electric anchor winch with chain & warp gypsy. Located under locker to give clean deck. Primary anchor is 45 lb Delta anchor type with 15 mtrs x 8mm short link galvanised chain and 40 meters x 16mm triple braid anchor warp

Primary anchor is stored in a specially designed anchor roller under the forward beam

Inflatable dinghy with Torqeedo electric outboard

Anchor winch has foot switch at the winch plus a remote up / down control at the helm station

3 x PVC inflatable fenders

3 x Mooring lines (each 15 meters x 14mm)

ANTIFOULING / STRIPING:

Epoxy barrier coat plus 2 coats of high quality black antifouling bottom paint

Seawind 1190 Sport badge on each hull and stern

Features

Daggerboards create less drag than mini-keels (7m3 reduction in wetted surface area), higher pointing ability (5-7 degrees), shallow draft (17.7inches or 450mm), and lighter construction

Dagger style high aspect retractable rudders offer reduced drag, improved performance, positive helm feedback, and shallow draft allowing beaching ability

Carbon reinforced forebeam and targa arch offering stiffer construction andreduced weight

Carbon bowsprit offering stiffer / lighter construction

Double spreader tall mast carries larger sail area and improves sheeting ability

Performance Sails are light weight aramid cloth reducing weight aloftand improving sail shape and performance

1190 Sport construction weight reduction of 600kg (compared to Seawind 1160) offering improved power to weight ratio

Outboard engines create significant weight reduction and can be tilted to eliminate drag when sailing. Eliminates growth on running gear and electrolysis and reduces maintenance and replacement costs

Fuel is stored external to the cabin