2011 Tarac 33
The Swedish built Tarac 33 was designed to offer racing or coastal cruising either short handed or sailing with family and friends. This beautiful yacht has race performance and big boat comfort but in a compact and brilliantly planned package.
Equipped with a large fully roached mainsail, self tacking jib plus asymmetric spinnaker, the Tarac 33 has an easy to handle sail plan which still provides almost unbeatable performance.
2011 Tarac 33
The Swedish built Tarac 33 was designed to offer racing or coastal cruising either short handed or sailing with family and friends. This beautiful yacht has race performance and big boat comfort but in a compact and brilliantly planned package.
Equipped with a large fully roached mainsail, self tacking jib plus asymmetric spinnaker, the Tarac 33 has an easy to handle sail plan which still provides almost unbeatable performance.
This example of the Tarac 33 is ashore here at Mercury Yacht Harbour on the Hamble River and available to view at short notice 7 days a week.
Please contact Alex or Ben on +for further information or to arrange your viewing.
Main photo from RTIR 2014.
On buying this Tarac 33 through TBS Boats Hamble, discounted first year berthing deals are available. (T&C's apply)
Build
Tarac 33 built in 2011
Beautiful and high quality racer cruiser built by CMI Composites, Sweden
Designed by Håkan Södergren with his brief as follows:
”There has been a need for a quick, easy-to-sail dayboat with the properties of a keelboat. That’s why I designed the Tarac 33 – a lively boat with almost unbeatable performance.”
CONSTRUCTION
Navy blue GRP hull with white superstructure
Grey non-skid decks
Vacuum injected sandwich laminate layup
Girders and stringers in high strength laminate
Lead fin keel
Carbon tiller steering
Spade rudder with double self aligning rudder bearings
Length overall 9,96 m
Waterline length 8,85 m
Beam 2,70 m
Draught 1,75 m
Mast 14,45 m
Displacement 3 200 kg
Keel weight 1400 kg
Above figures taken from manufacturers specification
Rig
Fractional sloop rig
Anodised aluminium keel stepped Benns mast with double swept back spreaders
Anodised aluminium Benns boom with 2 x single line reefing points
Solid rod kicker
Dyform standing rigging
Dyneema and Spectra running rigging
Mainsheet system 16:1 plus 8:1 fine tune
Mainsheet track across transom
Under deck headsail furler
Running backstays allowing for fully roached mainsail
SAILS
UK/Syversen Tape Drive S-Glas self tacking jib with battens
UK/Syversen Tape Drive S-Glas mainsail with stack pack
Furling gennaker and flying rigging
WINCHES
2 x Harken B40.2 2-speed, self tailing winches
Port side winch is powered with cockpit foot controls
Accommodation
Sleeps up to four
Double V-berth in forepeak
Saloon seating can double as 2 x single berths
Compact galley to port with gas hob, single stainless steel sink and coolbox
Heads compartment to starboard with sea toilet, wash basin and shower
Removable saloon table
Storage lockers plus drawer
Eberspacher warm air heating
Interior joinery in Khaya mahogany with teak and holly effect laminate soleboards
Upholstery in tan Alcantara
Machinery
Upgraded Yanmar 2YM15C 15hp diesel engine
Saildrive to 2-blade folding propeller
ELECTRICS
75ah battery plus extra 12v battery
Battery charger
Shorepower
240v sockets
TANKAGE
48 litre stainless steel fuel tank
60 litre stainless steel fresh water tank
30 litre stainless steel holding tank
All above figures from manufacturers specification
Inventory
NAVIGATION AIDS
Silva compass
Garmin 750 GPS plotter with AIS
Raymarine ST60 depth
Raymarine ST60 speed
Raymarine ST60 windspeed and direction
Raymarine autopilot
Garmin VHF with Hawk antenna
Navigation lights
GENERAL EQUIPMENT
Stainless steel pulpit, pushpit and guardwires
Pushpit removeable for racing
Back support cushions for cockpit guardrails
2 x fixed and 2 x opening portlights
Large cockpit lockers
Cockpit foot rail
Stern ladder
Warps and fenders
