OFFERED BY
Mark Cameron Yachts
LOCATION
Oban United Kingdom
YEAR
2021
LENGTH
23.95 ft.
Condition
Used
Name
EQUINOX
Year
2021
Make & Model
Cornish Crabbers Crabber 24
Boat type
Sail
Length
23.95 ft.
Fuel Type
Diesel
Location
Oban United Kingdom
Tax status
Tax Paid
Beam
8.86 ft.
Loa M
23.95 ft.
LWL
21.98 ft.
Draft Max
4.59 ft.
Draft Min
2.3 ft.
Fresh Water Tanks
100.0
The Cornish Crabber 24 was first introduced in 1975 and has proven to be a hugely successful design for the British builder with several revisions of the original basic design maintaining her appeal. In 2017 Andrew Wolstenholme was commissioned by the builders to undertake a full redesign of the Crabber 24, with the brief being to ‘progress the boat’s performance without turning it into an average white racing boat’. The Cornish Crabber 24 MkV was the result of this project. Blending modern technology with her carbon mast, timber gaff and boom with traditional styling the all new Crabber 24 MkV has rejuvenated this modern classic design while maintaining the traditional Cornish Crabbers family identity.
Built to her current owner's specifications the Cornish Crabbers 24 MkV EQUINOX is a fully loaded example of the class boasting an extensive inventory which includes:
Very lightly used and wintered ashore under her full boat cover the Cornish Crabbers 24 MkV EQUINOX offers buyers a rare chance to acquire an as new boat, viewers will not be disappointed.
PRESS REVIEW:
‘The Crabber 24 Mk V is certainly a very different boats to the Mk I version I sailed all those years ago, but really it should be judged on its own merits.
This is a comfortable shoal-draught yacht for a clientele who might be downshifting from a modern yacht with all the associated creature comforts and crucially are used to a bit of performance. In other words, they might like the idea of a gaff rig, but they don’t necessarily want to sail a relatively slow boat. The Crabber manages to combine these sometimes conflicting demands with the trademark Crabber character.’
Nic Compton ‘Talkin’ Bout A Revolution’ – Classic Boat, August 2018
Full copy of article available upon request
CONSTRUCTION
Hull Construction:
Single piece GRP moulded hull.
Simulation moulded planking effect
Monolythic laminate, hand consolidated in mould
Integral moulded casing for centreplate, part of hull structure
Moulded internal structural liner forming base of furniture units and incorporating engine beds
Plywood bulkheads bonded to hull and deck
Forespar Marelon composite seacocks
Topsides finished in off-white gelcoat with ‘Mystery blue’ sheer plank
Underwater hull finished with Coppercoat antifouling from factory
Deck & Superstructure Construction:
Single piece moulded deck incorportating superstructure and self draining cockpit.
Hand consolidated, sandwich construction with balsa core
Hardwood backing pads fitted in way of high load fittings
GRP moulded toerail with freeing ports running the length of the deck edge
Moulded non-slip panels to finished, decks, coachroof and cockpit
Cockpit locker hatches moulded in GRP with balsa core
Cockpit drain tubes are of moulded GRP tubes, glassed to hull and deck
Deck finished in off-white gelcoat with two-tone ‘parchment’ coloured, moulded non-slip panels
Keel & Rudder:
GRP mould long keel as part of hull form
Galvanised steel centre plate secured within GRP moulded casing
Centreplate lifted and lowered by block and tackle system lead to cockpit winch
Laminated marine plywood rudder
Transom mounted
Drop plate lower section to increase depth
MACHINERY
Engine & gearbox:
Yanmar 2YM15 marine diesel engine
14hp @ 3,600rpm
2 cylinder, naturally aspirated, indirectly cooled
Mechanical reversing marine gearbox
RCD 2 / EPA Tier 3 - 3c compliant
Single lever morse control
Maintenance & Performance:
Engine serviced autumn 2023
Recorded engine hours (May 2024) – 77.2hrs
Cruising speed 5kts
Propulsion & Steering:
Stainless steel propshaft
Featherstream 3 blade, feathering propellor
Rope Cutter – Spurs type
Hardwood tiller
Tiller extension
Autopilot:
Raymarine ST2000+ tiller pilot
ELECTRICAL SYSTEMS
Voltage systems:
12VDC onboard power system
230VAC shore power system
Shore Power System:
Extension lead to connect to shore supply
Galvanic Isolator
Single 16 amp connection point
Hardwired RCD protected system
Voltage indicator
2x 3 pin UK socket, battery charger, immersion heater
Battery Banks:
Battery Bank – 2x 12VDC, 80Ah, lead acid
Blue Sea Si-ACR charge control relay
Charging:
Mastervolt smart charger
230VAC – 12VDC
Alternators:
Single engine driven alternator
12VDC – 125amps
Solar Panel:
Single deck mounted 9.5w panel
Battery Monitor:
Victron BMV-712 battery monitor
Other Electrical:
12VDC charging socket at switch panel
High load 12VDC auxiliary socket at companionway
PLUMBING SYSTEMS
Fresh Water:
Pressurised hot and cold water systems
Mixer tap in galley and heads
Hot water provided from calorifier heated by engine or immersion heater
Bilge Pumps:
Manual Bilge Pump
Electric Bilge Pump
TANKAGE
Fuel:
Single diesel tank
Approximate capacity 43ltrs
Fresh Water:
Single fresh water tank
Approximate capacity 100ltrs
Holding Tank:
Single holding tank
Approximate capacity 43ltrs
Deck discharge or direct discharge overboard
Tank Monitoring:
Analogue gauge for fresh water tank
Analogue gauge for diesel tank
NAVIGATION & COMMUNICATION EQUIPMENT
On Deck:
Depth/Log/Speed – Raymarine i50 Tridata display
Wind – Raymarine i50
Plotter – Raymarine Axiom 7
Magnetic Compass – Plastimo Contest, bulkhead mounted
Communications Equipment:
DSC VHF – Raymarine RAY53 with masthead antenna
DOMESTIC EQUIPMENT
Galley:
Galley Cooker – Aqua Marine Neptune 4500, 2 burner and grill
Stainless steel sink
Mixer tap
Heads:
Toilet – Albin Marine manual toilet
Stainless steel wash hand basin
Mixer tap, extending out for use as shower head if required
Shower sump below grating with electric pump to discharge overboard
Heating & Ventilation:
Eberspacher diesel fired blown air heating system
Thermostatic cabin controller
Single outlet in cabin
Lighting:
Hullside mounted lighting throughout interior
Overhead lighting in heads
All LED lighting
ACCOMMODATION
Accommodation Finish:
GRP internal mouldings finished in off-white gelcoat
Joinery work and trims of teak and teak veneered plywood finished with Sadolin varnish
Bulkheads and furniture unit finished in Soft White eggshell paint
Teak and holly laminate finish soleboards
Upholstery throughout in Linara Prussion Blue fabric
Blackout blinds for portlights
Description of Accommodation from Forward:
Double V-berth forward, elevated above settee level, hinged back rest extending bunk length when in use
Storage locker beneath bunk with central hatch to access
U-shaped saloon settee wrapping around removable saloon table with hinged backrest folding up to extend bunk length below forward bunk
Saloon table mounted on full adjustable Laguna table mounting system, secondary table mounting in cockpit to allow use of table in cockpit also
Table forming infill between settee to create double bunk when required
Batteries located in locker beneath port settee, storage locker beneath
Switch panel outboard of port settee aft with storage shelf forward
Storage shelf outboard of starboard settee with built-in crockery storage area aft
Galley area to starboard with two burner gas cooker forward and inset sink aft
Storage locker space above worktop outboard
Heads compartment to port aft with manual marine toilet fitted aft, countertop outboard with inset wash hand basin
DECK EQUIPMENT
Rig:
Deck stepped, gaff rigged cutter
Selden carbon mast, finished in white
Timber boom, gaff and bowsprit finished in Sikens Cetol varnish
Stainless steel standing rigging
Gaff rigged, slab reefing mainsail
End of boom mainsail with track located aft of cockpit
Block and tackle kicker
Selden mainsheet track and car system
Selden track and car systems for jib and staysail
6 spinlock rope clutches in cockpit for lines lead aft
Halyard tidies mounted on bulkhead to port and starboard sides of companioway
Winches:
Primary Winches – 2x Antal W8 single speed winches
Secondary/Halyard Winches - 2x Antal W8 single speed winches
Sails:
Mainsail – Tan dacron, gaff-rigged, slab reefing
Jib – Tan dacron, roller reefing
Staysail – Tan dacron, roller reefing
Canvas Work:
Mainsails Cover – Beige fabric
Sprayhood – Navy, on stainless steel folding frame
Winter Cover – Full boat PVC cover, fitted with mast lowered
Anchoring & Mooring:
Bower Anchor – 7kg plough type anchor on 4m, 8mm chain and warp rode
Anchor Windlass – Quick electric windlass with foot switch controls mounted on foredeck
Mooring Warps – Selection
Fenders - Selection
Tender:
Inflatable Dinghy – 3D 2.3m lightweight, round tail dinghy, can be stowed in port cockpit locker
Navigation Lights:
Masthead anchor light
Low-level running lights
General:
Single bow roller to starboard side of bow sprit
Stainless steel, toerail mounted mooring cleats forward, midships and aft
Stainless steel deck-mounted stanchions supporting double tier stainless steel guardwires
Stainless steel pushpit rail wrapping around aft end, built-in folding swimming ladder to port side
Anchor locker accessible by lifting deck hatch to starboard side of bow sprit, anchor windlass mounted on deck, inboard of lifting locker lid
Deck hatch mounted on coachroof forward of mast step
Jib track and car mounted on inboard side of side decks
Staysail track and car mounted on coachroof top, outboard to port and starboard
Cockpit halyard winches and rope clutches mounted outboard of companionway to port and starboard
Primary and secondary winches mounted on cockpit coaming tops
Bench seating runs the length of cockpit to port and starboard and across the transom
Lockers beneath port and starboard seating
Laguna table mounting for using saloon table in cockpit
Gas locker beneath aft section of cockpit seating, centrally.
DISCLAIMER
In this case we are acting as brokers only.
The Owner is not selling in the course of a business. whilst every care has been taken in their preparation , the correctness of these particulars is not guaranteed. The Purchaser is strongly advised to check the particulars and where appropriate at their expense to employ a qualified Marine Surveyor to carry out a survey and/or to have an engine trial conducted which if conducted by us shall not imply any liability for such engine on our part.
This vessel is offered subject to prior sale, price change, or withdrawal without notice
ENGINE 1
Engine Manufacturer
Yanmar
Engine Model
2YM15
Drive Type
Shaft
Horse Power
14.0
Hours
78
Genoa
Yes
Mainsail
Yes
Winches
Yes
HULL
Hull Material
fiberglass
NAVIGATION EQUIPMENT
Navigation Lights
Yes
Depth Instrument
Yes
Autopilot
Yes
Vhf
Yes
Compass
Yes
Wind Instrument
Yes
Gps
Yes
Plotter
Yes
ELECTRICAL EQUIPMENT
Battery Charger
Yes
Shore Power
Yes
Heating
Yes
Battery
Yes
Bilge Pump
Yes
GENERAL EQUIPMENT
Anchor
Yes
Spray Hood
Yes
Fire Extinguisher
Yes
Fenders
Yes
OTHER
Keel Type
Lifting
Displacement(kgs)
2250
Fuel Tanks
43.0
Speed Log
Yes
Genoa
Yes
Mainsail
Yes
Winches
Yes
The Cornish Crabbers Crabber 24 is 24 feet long and has a 8.9 feet beam and a draft of 1.4. This Cornish Crabbers Crabber 24 is powered by Yanmar 2YM15 with 14.0 horsepower.. The Cornish Crabbers Crabber 24 is made of fiberglass. This vessel comes equipped with battery charger, shore power, heating, battery, bilge pump, anchor, spray hood, fire extinguisher, fenders as well as being equipped with navigation lights, depth instrument, autopilot, vhf, compass, wind instrument, gps, plotter.
LENGTH:
36.09 ft.
|
YEAR:
2008
LOCATION:
North Ayrshire
OFFERED BY:
Mark Cameron Yachts
$15,323
LENGTH:
25.59 ft.
|
YEAR:
1973
LOCATION:
Kames
OFFERED BY:
Mark Cameron Yachts
$31,272
LENGTH:
27.56 ft.
|
YEAR:
1982
LOCATION:
Kames
OFFERED BY:
Mark Cameron Yachts
$21,265
LENGTH:
21.0 ft.
|
YEAR:
2003
LOCATION:
Craobh Haven
OFFERED BY:
Mark Cameron Yachts
LENGTH:
24.57 ft.
|
YEAR:
2011
LOCATION:
Argyll
OFFERED BY:
Mark Cameron Yachts
$112,515
LENGTH:
33.73 ft.
|
YEAR:
2005
LOCATION:
Oban
OFFERED BY:
Mark Cameron Yachts
LENGTH:
24.02 ft.
|
YEAR:
1990
LOCATION:
beaulieu
OFFERED BY:
Network Yacht Brokers
LENGTH:
24.0 ft.
|
YEAR:
1978
LOCATION:
Cardiff
OFFERED BY:
BJ Marine
LENGTH:
24.02 ft.
|
YEAR:
1978
LOCATION:
Torpoint Cornwall
OFFERED BY:
Network Yacht Brokers
LENGTH:
30.51 ft.
|
YEAR:
2025
LOCATION:
Poole
OFFERED BY:
Waterside Boat Sales Ltd
LENGTH:
28.22 ft.
|
YEAR:
2018
LOCATION:
Salcombe
OFFERED BY:
Devon Boat Sales
LENGTH:
26.21 ft.
|
YEAR:
2011
LOCATION:
Inverness Marina
OFFERED BY:
Caley Marina
Mark Cameron Yachts, founded in 2018, offers top-tier brokerage services for yachts and motorboats on Scotland's West Coast. With over 20 years in the marine industry, Mark Cameron brings extensive knowledge and hands-on experience. Specialising in boats from leading global builders, we facilitate sales across the UK and internationally, leveraging modern technology and a strong European broker network. Discover more on LinkedIn or contact us for a premium, client-focused service tailored to your needs