$144,900
LENGTH:
37.01 ft.
|
YEAR:
2007
LOCATION:
Seattle
OFFERED BY:
Seattle Yachts
$34,900
LENGTH:
35.01 ft.
|
YEAR:
1984
LOCATION:
Branford, Connecticut
OFFERED BY:
Brewer Yacht Sales
$22,000
LENGTH:
35.99 ft.
|
YEAR:
1978
LOCATION:
Port Richey, Florida
OFFERED BY:
Pop Sells
$38,900
LENGTH:
37.99 ft.
|
YEAR:
1980
LOCATION:
Port Saint Lucie, Florida
OFFERED BY:
Pop Sells
$34,900
LENGTH:
35.01 ft.
|
YEAR:
1984
LOCATION:
Norwalk, Connecticut
OFFERED BY:
Pop Sells
$55,000
LENGTH:
41.01 ft.
|
YEAR:
1983
LOCATION:
Muskegon, Michigan
OFFERED BY:
Pop Sells
$36,000
LENGTH:
37.5 ft.
|
YEAR:
1985
LOCATION:
Port Washington, New York
OFFERED BY:
United Yacht Sales
$30,000
LENGTH:
35.99 ft.
|
YEAR:
1980
LOCATION:
Marathon, Florida
OFFERED BY:
Pop Sells
Boat not available.
LOCATION
Alameda, CA United States of America
YEAR
2005
LENGTH
37.99 ft.
Condition
Used
Name
Raven
Year
2005
Make & Model
C & C 115
Boat type
Sail
Length
37.99 ft.
Fuel Type
Diesel
Location
Alameda, CA United States of America
Beam
11.91 ft.
Cabins
2
Draft
6.66 ft.
Fresh Water Tanks
1 (30 Gallons)
LWL
33.01 ft.
If you are looking for a well-maintained, late-model performance cruiser/racer with an impressive record of podium finishes, WITH all the creature comforts of a lavishly-equipped cruiser (Cherry wood trim, full galley, refrigeration, two separate double staterooms, nicely appointed head with Vacuflush toilet and separate walk-in shower, look no further, this is your boat!
If you are looking for a well-maintained, late-model performance cruiser/racer with an impressive record of podium finishes, WITH all the creature comforts of a lavishly-equipped cruiser (Cherry wood trim, full galley, refrigeration, two separate double staterooms, nicely appointed head with Vacuflush toilet and separate walk-in shower, look no further, this is your boat!
Present owner has documented improvements and service history since first purchased by him. Highlights include:
- 2018 Quantum Carbon Main
- 2018 Forespar Carbon Spinnaker Pole
- 2019 Two new spinnakers
- 2017 New Standing Rigging
- 2018 New B&G Chart Plotter
- 2018 Winch and running rigging upgrades
- Upgrades to Hydraulic system, including pump refurbishment and new backstay ram
- New over boom boat cover and mainsail cover
- Multiple rigging improvements, and tune-ups to maintain competitiveness
- Dodger and Genoa roller furling are also part of the inventory
The light and airy interior is tastefully trimmed with (but not overpowered by) Cherry joinery throughout.
The ergonomically designed companionway stairs make for an easy descent into the the main saloon at sea in most weather conditions. To port is a forward facing chart table with an instrument panel that houses an IPAD that can be used for navigation and general use. A nicely appointed galley to starboard has more than adequate storage, 12 volt refrigeration, a three-burner Force 10 LPG Stove with oven and large, deep sink with matching Corian countertops.
There is a saloon table on centerline that folds out to provide dining for 6 and the comfortable banquette seating converts to two comfortable sea-berths.
Aft of the companionway and to starboard with its own door is the aft double stateroom, while to port there is a luxuriously appointed head with separate shower enclosure and vacuflush head are in the same location to port.
Forward is a self-contained double V berth with adequate light, storage and ventilation
- Carbon Mast
- Forespar Carbon Spinnaker Pole (2018)
- Standing Rigging (Replaced & Upgraded 2017)
- Electric Harken 46 ST Mainsheet Winches
- 2 Harken 40 ST Primary
- Electric Halyard Winch
- Dyneema Backstay (New 2018)
- Hydraulic Pump replaced 2019, Backstay ram replaced 2019
- Harken Jib roller furling gear is not currently installed, but can be included
- Jib Car purchase added, Vang Purchase Added, Vang and Foreguy Doublesided
- New Dyneema Backstay Added and all running rigging replaced 2018/2019
-Several professional tune ups during this time to optimize performance and handling
- All lines lead aft for safety and ease of use
- Slab Reefing
- "Harken" Roller furling
Epoxy Hull - stronger, stiffer, and more resistant to osmosis than either polyester or vinylester. Impregnated, vacuum-bagged, and post-cured in a sandwich with unidirectional E-glass and Core-cell linear-polyurethane-foam coring.
- B&G–Zeus³ 9 Multifunction Display and Pod at Helm (New 2018)
- IPad with enclosure and misc software installed at the chartable
- B&G WS320 bluetooth wind sensor. (2019)
- B&G Triton 20/20 HV mast display (2019)
- Raymarine" ST6001 AUTO PILOT: “Raymarine”
- Ray Marine ST60s Depth, speed,
- B&G Multi-display Wind Direction/Speed Indicator (2019)
- New stereo w/ Bluetooth installed w/ rewire to cockpit speakers (2017)
- Propane -LPG with 12V solenoid shutoff and dedicated approved storage in cockpit
- WATER TANK: Poly. CAPACITY: 70 gal. (rptd.)
- HOLDING TANK: 24 gal. (rptd.) poly
- DISCHARGE: Ob & Macerator BILGE PUMP's: 1- Man., 1- 12V auto-man
- MARELON through Hull Fittings
- FUEL 26 Gallons
- 60 W Alternator (Replaced 2018)
- 12v nGp 27 Batteries 3
- Heart 110-12V charger
- Heart 10 Inverter with remote
-110v 30 amp shore connection and cable
- GFI Circuit protection
- Deck level 12 v lighting
- 12 v overhead and task lighting throughout
Some notable race records this year:
Engine Count
1
Engine Horse Power
28 HP
HULL
Hull Material
Fiberglass
ELECTRICAL EQUIPMENT
Holding Tanks
1 (20 Gallons)
OTHER
Double Berths
2
Single Berths
2
Displacement(kgs)
11800 lbs
Electrical Circuit
110V
Engine Year
2005
Engine Type
Inboard
Head Room
6 ft 1 in
No of Heads
1
Keel
Fin
Propeller
Folding propeller
The C & C 115 is 38 feet long and has a 12 feet beam. This 2005 diesel C & C 115 powered by Yanmar 3YM30 with 28 HP horsepower. The C & C 115 is made of fiberglass. This vessel comes equipped with holding tanks .
Seattle Yachts International, based in Anacortes, WA, specializes in new and used cruising yachts across North America. With expert brokers and a wide range of yacht brands like Hampton and Hanse, we ensure exceptional service in yacht selection and purchase.